Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Making a roman wooden shield with the oldest plywood technique - Archaological subjet

Featured Replies

  • Popular Post

Hello everyone,

I’m not sure if I’ve mentioned it before, but besides being a hobbyist woodworker I have also worked professionally (understanding “professionally” as a reference to quality, not that I do it full-time) in the archaeological reproduction of ancient objects. My main focus is shields, and my field of specialization is Roman shields and the use of archaeological techniques and natural materials, such as glues and paints. I study every academic and/or specialized publication I can find, including excavation reports, laboratory analyses, archaeological records, etc.

I’m going to focus this post on the earliest stage of the project, since it’s the only one that deals purely with woodworking: the construction of the wooden core and the carving of the central piece, called the spina.

This shield is almost a reproduction of the original find from Fayum, Egypt, dated between the 3rd and 1st centuries BC. The attribution to a Roman context is somewhat debatable, but it seems the most likely. As far as I know, the original shield represents the oldest known find of plywood. It was made of three layers of thin birch veneers (there are no birches in Egypt, so either the shield was imported, or the wood was, or it traveled with the soldier from afar). The central layer is made of strips about 10 cm wide and thicker than the outer ones, arranged vertically, while the outer layers run horizontally and are narrower and thinner, about 25–50 mm. There are no precise measurements of the layers or the total thickness, but I estimate no more than 7 mm, judging from the vague reference in the original 1940 report and what other Roman shield finds show. I therefore think the central layer was 3 mm thick and the outer ones 2 mm. As for the shield’s dimensions, they are 128 × 64 cm, with a depth of one Greek palm (231 mm).

Since this was a commission and my client was concerned about the weight, I made it in Spanish poplar, which saved us just over a kilo compared to birch. To begin, I cut board sections to the required lengths—some 140 cm, others 100 cm—then sawed thin veneers to the needed thickness (10 at 3 mm, about 70 at 2 mm, in a variety of widths). The veneers were incredibly flexible, so to form the core I only had to place them in my press, where the pressure shaped them. To make the work easier, I first glued the central layer flat, edge to edge, to form one large sheet. After that I placed the rest of the veneers on both sides and pressed them carefully. For gluing I used natural casein glue, which can be made from milk or cheese and other ingredients. After two days drying I took it out of the press, having first marked the axes in pencil. Then I cut the outline, the hand hole, and sanded it to remove micro-ridges between the strips. Fortunately, it came out almost perfect.

The spina was made of three sections: two thin side pieces and the umbo, or central boss, which has the hand hole. They are joined with a vertical tongue-and-groove joint, unlike the drawings of historian Peter Connolly, who showed it as horizontal. The existing photographs of the original find indicate that my version was correct. The umbo was nailed on with iron nails (forged from bloomery iron, as in antiquity), while the thin side pieces were fixed with conical wooden pegs (and casein glue).

The wood weight was 3.6 kg: 3 kg for the core and 600 gr for the spina. The finished shield weighed 4.8 kg, very light for its size.

I’ve tried to summarize as much as possible—this is a very broad subject. The photos I’ve attached, with watermark, are the ones I used when posting on my FB page, Ars Scutae. I’ll also leave links for a more detailed explanation in the series of posts I wrote there. Post I, post II, post III. I hope you can read them.

If you have any doubts or questions, feel free to ask.

_MG_0220 logo.jpg

_MG_9967logo.jpg

_MG_9968logo.jpg

_MG_9971logo.jpg

IMG_20220928_150656.jpg

IMG_20220929_151531.jpg

IMG_20230530_105449.jpg

IMG_20230623_132547.jpg

IMG_20230626_121910.jpg

IMG_20230802_113007.jpg

IMG_20230816_114000.jpg

  • Popular Post

Wow, now that is something completely different.  Very interesting.  I hope that when you next do a similar project you can share more pictures of the process?

Here is an "archeological" question.  How did the Romans even make veneer in the first place?  It is hard enough to do with modern machinery, and for something like this they would have needed veneers that were very uniform.  I know they had edge weapons, but did they have tools with edges sharp and durable enough to slice wood (e.g. plane)?  Hand sawn?  

  • Author
On 8/30/2025 at 4:01 PM, Mark J said:

Wow, now that is something completely different.  Very interesting.  I hope that when you next do a similar project you can share more pictures of the process?

Here is an "archeological" question.  How did the Romans even make veneer in the first place?  It is hard enough to do with modern machinery, and for something like this they would have needed veneers that were very uniform.  I know they had edge weapons, but did they have tools with edges sharp and durable enough to slice wood (e.g. plane)?  Hand sawn?  

I remember seeing a paper on metallurgical analysis of several Roman swords, and their HRC hardness was comparable to modern steels. Obtaining good steels was not easy, but it was feasible, although there are other factors besides hardness to consider when evaluating steel. I managed to make about 50 1.2 mm sheets for a shield using a Makita MLT 1000, but how they did it back then is open to debate. 
There are rustic methods that can produce thin but very irregular slats in terms of shape and thickness, consisting of hitting the trunk, making incisions to mark the width of the strip, and pulling to tear them off, as the blows break the bond between each layer of rings. I doubt that this would have been used for a shield, which is a sophisticated item. My guess is that the most feasible method would be to use a saw attached to a movable frame that also holds a pre-cut and squared block, and by simple human action, guided and calibrated slices are cut. Perhaps they could then be planed on a template to finish calibrating them. There are tool marks on shields made of planks, but I have not seen them on plywood shields, so I cannot analyze and extract more data. I would like to test my hypothesis, but although the device is probably simple, I am unable to design it to carry it out. If anyone would like to help me make a CAD design using a panel saw, they would be most welcome.

  • Popular Post

I can see ways to produce the veneers using tools of the period, but am surprised at the quality of adhesives that would make the plywood possible. I guess people that could make concrete able to last 2000+ years knew a thing or two about meterial science.

  • Author
  • Popular Post
On 8/31/2025 at 3:38 AM, wtnhighlander said:

I can see ways to produce the veneers using tools of the period, but am surprised at the quality of adhesives that would make the plywood possible. I guess people that could make concrete able to last 2000+ years knew a thing or two about meterial science.

The concrete issue is survivor bias. Many Roman constructions have not survived to the present day because they used standard or poor-quality materials, while those we know of are just the best examples.

Natural glues are not bad glues at all. Casein and bone and hide glues are very good, and bow makers use sturgeon bladder glue, which glues like crazy. These glues usually have an adhesion capacity equal to or greater than that of wood itself if prepared properly, but they can suffer from humidity and heat.

  • 1 month later...
  • Author
  • Popular Post
On 8/30/2025 at 4:01 PM, Mark J said:

Wow, now that is something completely different.  Very interesting.  I hope that when you next do a similar project you can share more pictures of the process?

Here is an "archeological" question.  How did the Romans even make veneer in the first place?  It is hard enough to do with modern machinery, and for something like this they would have needed veneers that were very uniform.  I know they had edge weapons, but did they have tools with edges sharp and durable enough to slice wood (e.g. plane)?  Hand sawn?  

It seems almost certain that I will have a couple more shields in the works that are very similar to this one. I will make sure to take some photos of the process and post about it. I may also cover the topic of painting, as the use of casein paint seems to be making a comeback among traditional woodworkers.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.