Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

I need a new saw blade. I have doubts about which one to get and what the tooth type and tooth count should be

Featured Replies

Hello. The current blade I'm using—the stock one that came with my Makita MLT100N—needs sharpening, and I'm considering buying a second blade that is better suited for what I do most: ripping veneers between 1–3mm thick for making roman shields. I always rip softwoods (mainly poplar and linden) along the grain. What I am certain about is that I need a thin-kerf blade to minimize waste; if I'm laminating at 1mm and my current blade has a tooth width of 2.1mm, it's already wasting double the thickness of some of the veneers I produce—imagine if it were any wider.

What would be the most suitable option?

1000013346

1000013345

I’d look at a dedicated thin-kerf rip blade with a lower tooth count (something in the 24T range) and a full-kerf stabilizer if your saw can handle it. A good thin-kerf blade will cut cleaner and waste less than that stock blade, especially when you’re slicing 1–3mm veneers. Since you’re ripping softwoods with the grain, you don’t need a high tooth count.

This depends on how wide your resawn boards are, but I have found that the 7.5 inch circular saw blades, common here in the USA, take less kerf than a "thin-kerf" 10 inch tablesaw blade. If kept clean, they make good quality cuts, and are certainly less expensive. Could that be an option for you? Even ripping from both edges, the maximum resaw would be only a bit over 4 inches, or ~100 mm.

I take it that you don’t have a band saw? 

  • Author
On 2/28/2026 at 3:00 AM, wtnhighlander said:

This depends on how wide your resawn boards are, but I have found that the 7.5 inch circular saw blades, common here in the USA, take less kerf than a "thin-kerf" 10 inch tablesaw blade. If kept clean, they make good quality cuts, and are certainly less expensive. Could that be an option for you? Even ripping from both edges, the maximum resaw would be only a bit over 4 inches, or ~100 mm.

I cut veneers in a range of 25-92mm. 92mm is the maximum cutting height of my saw, I believe with a 260mm blade; the maximum it can handle. I usually prefer to cut veneers as wide as possible.

 

On 2/28/2026 at 3:17 AM, Coop said:

I take it that you don’t have a band saw? 

No, I don't have a band saw. In fact, the circular saw is practically the only power tool I'm not going to get rid of in my workshop. It's vital for making shields, but everything else, including traditional woodworking, I do by hand.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.