nikbrown Posted September 13, 2011 Report Posted September 13, 2011 We recently got a new fence put in and it's a 4 board horse fence. I'm going to paint it with black Lexington FenceCoat. The gate the fence guys put in isn't doing it for me. I've been playing around in SketchUp and came up with the following: Not sure it's quite right. It seems a bit heavy looking to me compared to the fence... but I'm not quite sure what direction to take it from here. Or maybe I've just been staring at it to long. Quote
Beechwood Chip Posted September 13, 2011 Report Posted September 13, 2011 Can you replace the dark panels with dark spindles or slats? Quote
AlanWilley Posted September 13, 2011 Report Posted September 13, 2011 I think it would look better with the top rail dished instead of arched. I also agree with Duckisser that it would look better without the panels. Quote
nikbrown Posted September 14, 2011 Author Report Posted September 14, 2011 Some good ideas here. I knew it looked to heavy one I put in the photo. I"ll jump back to tinkering a bit. Thanks! Quote
runningwood Posted September 14, 2011 Report Posted September 14, 2011 I agree, lose the panels altogether and either leave it open or put thinner material in the voids. Quote
capnjack2 Posted September 23, 2011 Report Posted September 23, 2011 Maybe just open the panels a bit, like the back of the Adirondack Chair in the Guild Build. Check out the recent gallery images. Jack Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.