Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing a Walnut Wall Clock

Featured Replies

I'm wrapping up the construction phase of my sister's wedding present, a walnut wall clock. I was hoping that you guys could provide some insight regarding how to finish it. I can't find it now, but I think I read that shellac will not work as it will end up graying the wood. Is an varnish poly blend a way to go?

A couple of other notes, The sides and top/bottom are a nice even grain and color but the back has a bit of light wood running up the side. I'd like to even this out if possible.

What about sealing end grain and the bead around the edge of the door and ends?

I'm not sure where she will put it, will it gray if it's in the sun? Is there a way to prevent it?

Thanks in advance.

if you want to seal the end grain just sand it a couple times with softer grit past what you did the top of the boards. then they will even out to about the same.

  • Author

Ok, so if I sand to 220 on the face of the board, go to 400 on the end grain and that will even out the stain? No need for a pre finish or a cut down shellac? Interesting. Any suggestions for finishes?

its not always a sure thing but i always do it when im making small keep sake boxes since its does not hurt anything. but i would go with the shellac and pre finish. when your sanding the end grain look for it to be turning a whitish color from when its being sealed by the sandpaper. as for the greying a more exp wood worker can give you more hints since i havent worked much with wallnut. but i would think that its greying comes from exposure to sunlight and not the chemical. and a clock wont be in direct sunlight much. thats my thinking I dont know for shure.

anyone with better finish exp if im completly off my mark please say so since i always look for tips

  • 2 weeks later...

I did a grandfather clock in Walnut about 35 years ago ... finished it with Minwax's Antique Oil Finish ... at the time, it was the best I had available and it came highly recommended by a friend. Topped it off with a coat or two of Dark Finishing Wax. It came out great, and it looks as good today as it did the day I finished it. Lots of other really good options out there, but this one remains strong. Today, I'd possibly go to Waterlox, but only because I've come to be very comfortable with a finishing schedule using it. If you should decide to try Waterlox, thin it at least 2 parts VM&P Naptha to 1 part Waterlox. Apply it with a rag ... let it penetrate ... wipe it back just as it begins to get tacky. Creates a finish that looks very soft & natural ... doesn't look like there's a "barrier" between the wood and the eye.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.