tdale51@yahoo.com Posted October 8, 2011 Report Posted October 8, 2011 hello all, I'm a beginner and I guess I would classify myself actually as a normite but lately as my skills and confidence grows I'm wanting to do more with hand tools. I know how to sharpen your standard straight blades like on chisels, planes, scrapers and such. What I don't know is how one would sharpen a curved blade like you'd find in a spokeshave or molding plane. What is a good source for this info? Thanks all. Dale Quote
Darnell Hagen Posted October 8, 2011 Report Posted October 8, 2011 Custom "stones" can be made by using the tool to cut a profile in close grain hardwood, then charging the block with a honing compound. Leather will also hold compound, and can be shaped to fit large profiles. Slip stones and water cones are another option, either as factory shaped stones, or shape your own from old stones. Quote
tdale51@yahoo.com Posted October 8, 2011 Author Report Posted October 8, 2011 Darnell, Thanks for the reply and the information. That at least get's me pointed in the right direction. When you say charging the block with honing compound I'm assuming that's some sort of paste correct? Quote
Darnell Hagen Posted October 9, 2011 Report Posted October 9, 2011 I use a green chromium oxide buffing compound, it's an abrasive with a wax binder, and works like a big crayon. You can also use diamond paste, or even 3M abrasive film. Quote
lwllms Posted October 10, 2011 Report Posted October 10, 2011 Dale, One could write a book on sharpening profiled hand tools. Old molding planes often require significant reshaping but, once properly shaped are pretty easy to maintain. Efficient reshaping often requires grinding, slips will get you there if you're willing to work at it but honing compound won't. If you could be more specific, I'll try to answer your questions. Or you could get the DVD on sharpening profiled hand tools from Lie-Nielsen. I do have a financial interest in that DVD so you might want to ask for or search out some reviews. Quote
Onboard Posted October 10, 2011 Report Posted October 10, 2011 Dale, you might find this forum discussion of interest. Maybe I’m wrong, but perhaps the “lwllms” who posted here may be the “lwilliams” that posted there(?). This short article reflects what Darnell has already stated, however, you’ll need to be a member of FWW online to read it. Wiley has an interesting approach for sharpening molding plane blades. Quote
lwllms Posted October 10, 2011 Report Posted October 10, 2011 Onboard, The criticism of the DVD is probably valid. I didn't stress enough that the steps I show for each tool are for the initial preparation and that normal sharpening and maintenance is a lot easier. However, the sharpening or maintenance steps are shown for each tool. Quote
Onboard Posted October 11, 2011 Report Posted October 11, 2011 Onboard, The criticism of the DVD is probably valid. I didn't stress enough that the steps I show for each tool are for the initial preparation and that normal sharpening and maintenance is a lot easier. However, the sharpening or maintenance steps are shown for each tool. No criticism from me. After reading the entire thread, I concluded that the nay-sayers weren’t reading your comments correctly. I got it, but I guess they didn’t. I also think the OP should have rewritten their post to one that was simply inquiring. I included that particular forum link because I felt it has some good insight on sharpening “curved blades” primarily because of your replies. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.