Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Roubo Adding Angled Leg Clamp

Featured Replies

Hi Mark, I am a relatively new wood worker and joined after watching almost all of your videos and then finding out that the next build is the roubo workbench!

CONGRTULATIONs on the new family addition... Being a dad is very cool. I have a 15m old.

I cannot seem to get an answer to a question I have about the build. I read Christopher Schwarz book Workbenches and came across the English benches 20 degree angled leg vise. Chris had a few good things to point out about it, mainly that you can get a solid 8" of clamping surface on long board (boards extending down to the floor). The reason being that the vises screw is off-set by the angle so it ends up out of the way.

I would like to know the advantages and disadvantages of this leg clamp over the upright style.

Also would it be possible to effectively install the roubo leg vise on the 20degree angle by building out to the right at the top of the leg and to the left at the bottom of the leg.

I would really like a bit of guidance and suggestions on this one. Here is the concept I have in mind but it is on an A-framed English bench (I am not a fan of that huge apron)

Thanks, Stephen.

Ohhhh ok, now I remember that from the book. Thanks for the picture. You know, given the extra work in designing and modifying the Split Top Roubo, I don't really think it is worth it. I understand the additional potential clamping surface offered but that's really nothing you can't get from the sliding deadman and a holdfast should you really need it. With the bench as designed, I can't imagine ever saying to myself, "boy I wish I would have put that 20 degree angle vise in there".

But if you really think you might need that feature and you don't mind doing the necessary modifications, there doesn't seem to be any major disadvantage to the functionality of the 20 degree vise.

  • Author

Thanks for the info. I am still considering it but it could also be a retro fit after I try the bench as it is in the plans. I have never used a deadman nor really had a good bench so perhaps I should stick with the plans and then retro if I find I have the need.

Thanks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.