duckkisser Posted December 3, 2011 Report Posted December 3, 2011 ok, so some of you know about how i finally broke down and bought a lathe. well here are some projects that i thought were pretty darn cool http://www.israelwoo...v2=213&cat=site fruit ring ring http://www.woodturni...g_Bracelets.pdf bracelet http://www.woodturni..._ruth_niles.pdf coffie scoop kniting needles http://www.turnedtre...ochet_hook.html size chart http://www.daystarha...okSizeChart.pdf http://www.woodturni...ts.php?catid=44 i find these intimidating http://www.davidreed...ula/Spatula.htm spatula this is prity detailed and very clear. http://content.pentu...idgemagnets.pdf know i know what to do with my cut off junk. http://www.woodstore.net/flhufe.html i realy like this bird feeder. http://www.woodturni...g_projects.html here is the site that i got all the links from. Quote
sbarton22 Posted February 18, 2012 Report Posted February 18, 2012 Lots of stuff there. Those inside out jobs are very weird. I tried to make a Christmas ornament and it was awful. Quote
duckkisser Posted February 18, 2012 Author Report Posted February 18, 2012 you can only get better i made 20 two inch bowls before i finaly got them to work right on the 20th bowl then i made a few out of some thick spalted wood i had floating around the shop. remember practice practice practice practice then eat some pasta then practice practice prace go to bed get up practice and finaly i started to get it right. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.