Recommended Posts

Posted

I bought a Hock iron for my beloved Bedrock 604 this summer and am still amazed on the difference but I didn't bother with the chipbreaker. Now I with the money I saved from Marc's crazy 1/2 price sale last night on Guild memberships I bought a new iron for my jointer but am thinking I may want to add the chipbreaker to this one so a few questions. 1. For those of you that have added both the iron and the cb, have you noticed a big difference as compaired to if you just added the iron and kept the stock cb? 2.Do any of you have the Hock and Veritas chipbreakers and is the Hock any better? Spec wise they look about the same but people always rave about the Hock. 3.IBC, do any of you guys/gals have experience with them, and are they any better/worse than Hock? Woodcraft has a bunch of irons for various planes on overstock sale and some have big savings, I was thinking about getting one for my #3, the problem is the ones they have on sale are A1 and I use oilstones!! Am I asking for big trouble or since I secondary bevel all mine will it not be that big of a deal? They have it for $27 and some change so I am tempted, it's not my main go-to plane but it does get a bunch of use especially since that is the one my daughter uses the most. Any thoughts would be greatly appreciated and have a very Merry Christmas.

Nate

Posted

I have experience with LN and LV irons and breakers, Hock irons, but not the Hock breaker. I think the improvement varies, based on the quality of tool at the start. My experience has shown the thicker aftermarket irons to provide the most initial gain. Some planes may need the mouths altered to accept both an aftermarket breaker and iron.

How does the plane work now? Are you trying to solve a specific problem?

All of my upgrades were purchased at different times, with varying availability of aftermarket options. If I were doing it all over, based what's available now, I'd probably go with the Veritas combos.

I don't think I'd go farther than a good iron on my #5 and 8. I simply cleaned up the stock breakers for those on a stone and they perform well. I don't expect these planes to generate see-through shavings, as I use them for either hogging or straightening edges, not final smoothing. For example, my #5 most often corrects major problems before the stock gets machined, and the #8 cleans and matches glue-ups after machine jointing or ripping.

Posted

My plane is a pre WW2 Stanley that is in great shape and I have put it through it's paces for several years now but I think my chipbreaker has been bent back and forth through the years (before I got it) a bit too much and is loosing it's spring plus the cap iron screws head has been mangled since I got it and needs to be replaced. After I bought the new iron it just made me take a closer look at the cb and I started thinking.....

Nate

Posted

I have the Veritas combo in my #7. I like it, but it did close up the mouth and I really can't get a big thick shaving through it. I could probably rework the mouth a little, but I can't bring myself to do it.

Posted

If the breaker is beat, I'd go for any of the three.

Since your plane is a bedrock, you might be able to fit a thicker combo than non-bedrocks, without modifying the plane.

I use waterstones, so I can't comment on how things will sharpen on your oilstones.

Posted

i have the iron and breaker on my #4. It mates very nicely out of the bag but I don't know if I'd say it's necessary (in my case it was as the iron and breaker on the plane were destroyed when I got it). So long as you get it set without a gap you'd probably be fine with just the iron.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 42 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined