davestanton Posted December 31, 2011 Report Posted December 31, 2011 As there is only a small dollar difference to jump to the 19 inch, could anyone explain why a 19 inch is superior? Quote
mikem Posted December 31, 2011 Report Posted December 31, 2011 Without seeing the specs, there are two factors here. The first one is you are going to get another 2" between the blade and the saw's support post. The other is its resaw capacity. Without seeing the specs, it is hard to say what the difference is, but likely the 19" has more capacity as well. Quote
Morton Posted December 31, 2011 Report Posted December 31, 2011 The mass of the wheels imparts more energy in the blade making for faster, smoother cuts. The saw weighs more giving it more stability. And the bigger resaw capability and larger table (potentially - not sure what brand / models you're looking at). Quote
davestanton Posted December 31, 2011 Author Report Posted December 31, 2011 Here is the link I think in North America the brand would be known as Grizzly. As with photocopiers many years ago that were made by one factory, usually in Asia, and re-badged. Quote
wilburpan Posted December 31, 2011 Report Posted December 31, 2011 Bandsaws are one tool where bigger is almost always better. With the two bandsaws you are looking at, the 19" version gives you an extra 24 kg in weight, a table that's 25% bigger in area, the capacity to run a wider blade, and an extra 50 mm in rip capacity, and you have to give up a very little extra floor space. The only reason I don't have a bigger bandsaw in my shop is a ceiling height limitation. If I ever move to a new shop, I'm getting the biggest bandsaw that I can fit into it. Quote
davestanton Posted January 1, 2012 Author Report Posted January 1, 2012 Thanks everyone. I think I will have to spring for the 19" Quote
dwacker Posted January 1, 2012 Report Posted January 1, 2012 Before stepping up th the larger saw take a look at the spine. If its not larger and more stout than the smaller saw then the smaller may be a better option. With alot of saws they just upsize the cabinet and dont add to the spine. Grizzley saws have weak spines in general. Quote
tim0625 Posted January 6, 2012 Report Posted January 6, 2012 Yeah, but Don, probably what we ( or Dave) would be doing with it, it probably wouldn't make a lot of difference if the spine were the same (?) Dave may do some resaws and if it were a difference of 17 to say 24"...that could translate into a significantly larger log but I'm thinking a couple inches probably isn't a big deal. The difference is only $150 and in 95% of the cases, the 17" will get the job done but there will be the few times Dave will be glad he spent the extra money! And THAT eliminates the inter-continental-cussing...ok at least some of it 1 Quote
dwacker Posted January 6, 2012 Report Posted January 6, 2012 The more resaw height you have the heavier the spine need to be. Have you ever seen that saw that was great new that cant hold blade tension even with a new spring. Thats because the spine was to weak from day one. Saw manufacturers are giving people what they want and thats resaw height but they are not putting the effort into a heavy spine. I measured spine deflection on every saw I could find before buying and found that I was better off with a small capacity than a flexing spine. Don Quote
davestanton Posted January 6, 2012 Author Report Posted January 6, 2012 This is good to hear guys. That is why I am asking what appears to be dumb questions. I will give serious consideration to the replies when I make my mind up. Thanks again. Quote
tim0625 Posted January 7, 2012 Report Posted January 7, 2012 The more resaw height you have the heavier the spine need to be. Have you ever seen that saw that was great new that cant hold blade tension even with a new spring. Thats because the spine was to weak from day one. Saw manufacturers are giving people what they want and thats resaw height but they are not putting the effort into a heavy spine. I measured spine deflection on every saw I could find before buying and found that I was better off with a small capacity than a flexing spine. Don gotcha...good info Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.