Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Discrepancy in Measurements or just me?

Featured Replies

Did anyone notice that there is 3" difference between the rabbet in the top for the wagon vise (14") and the dog hole strip length (17" less than the top)? Purpose for this? Does this allow for full travel on the vise screw?

You can certainly make them both 17" of you like, but the 14" is enough to provide full travel on the tail vise. The goal is to remove as little material from the top as possible, so removing the extra 3" just isn't needed.

The nut block itself only needs about 14" in the rabbet for full travel. But remember the plate on top of the nut block (the thing you secure the dog block to) actually leads the nut block by a few inches. This is why the dog strip starts a little further down. The dog block itself will take up this space at full extension of the vise.

  • Author

The nut block itself only needs about 14" in the rabbet for full travel. But remember the plate on top of the nut block (the thing you secure the dog block to) actually leads the nut block by a few inches. This is why the dog strip starts a little further down. The dog block itself will take up this space at full extension of the vise.

The nut block itself only needs about 14" in the rabbet for full travel. But remember the plate on top of the nut block (the thing you secure the dog block to) actually leads the nut block by a few inches. This is why the dog strip starts a little further down. The dog block itself will take up this space at full extension of the vise.

kinda figured.............just wanted to make sure........thanks guys

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.