Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Refinish hardwood floor

Featured Replies

Greetings!

My mom and I are currently leasing an apartment that has hardwood floors. After using my computer chair for several years, the areas under the chair have worn out. Unless this damage is repaired, they'll deny returning our deposit. I was wondering what's the quickest way of refinishing a portion of hardwood floor. Here's what it looks like:

imgp3742.th.jpg

(Excuse the dirty floor, click for huge picture.)

I'm guessing the steps aren't very different from regular refinishing, and go (something?) like:

- Sand the area down a bit.

- Clean with mineral spirits.

- Apply a thin sealer coat of shellac.

- Apply Water-based finish, sand lightly in between coats.

- Clear coat or two to protect finish.

However, I've never done this... so I'd like your recommendations. I haven't watched TWW in years, so I may not remember things correctly.

-robodude666

Is the wood scraped and gouged, or is it mostly in the finish? From the pic it looks to be mostly surface damage where moisture has turned the finish milky in appearance... Without re-doing the whole floor it's going to be difficult to match the aged appearance; even though it will look better, it will still be new material surrounded by old (look like a patch). IMO I would just clean really well with a mild detergent (or even plain hot water), let dry and knock down with 120grit paper. vacuum clean and give a quick wipe with some tung oil... I can't say that it's what I would consider a "proper repair" but might match up fairly close. Using a poly or hard finish (not water based; I doubt that's what was used originally) you'll have an edge where you stopped brushing / wiping.. IMO, best option would be to try some different oils to see how the color matches up....

Plan B... Buy a rug :)

Good luck

Spot repairs can be tricky and frustrating. If this is just to make it look good for the sake of the security deposit, I would just empty the room, Buff the entire floor with 240 strips on a red scuff pad, then put down one coat of shellac uv sanding sealer, followed by one or 2 coats of poly. Should do the trick.

In the long run, this will be easier than being on your hands and knees messing with blending techniques just to wind up not getting close enough and getting frustrated.

  • Author

If I wash the area, it turns the same exact color as the rest of the floor - you can't even tell there's any damage. The moment the floor dries, you can see the damage again.

I'm not too particular in matching the color exactly. Just so that it looks good enough so we can get our $3k+ bucks back. I know it would probably be better to do the entire floor, but seeing as there's (a lot of) furniture in the room it would be difficult. Though I do understand how it would be a better solution in the long run...

If I attempt to do a spot repair, what's the worst that can happen? I sand the spot repair away and I'm left with where I am now... then I just go into the full repair.

Theres this stuff they sell at lowes and hd called reviver or rejuvenater, its usually in the paint aisle, give that a try it might be a quick saver.

You could also try some paste wax on the affected area. It may be enough to bring the floor back enough to pass inspection.

- Mike

  • 6 months later...

You should call some professionals. They can work better than you as they know how to tackle this problem. I was also a victim of same problem and just destroyed my floor when i started doing myself. But because of one wise man suggestions I called professionals and now they look like nothing was happened to the floor :-)

hardwood floor refinishing sacramento

I agree with johnsmith. In this case, where there is a lot of money on the line, go with a pro. At least get a quote, and see if it's worth it. I will hire a pro to do my floor when it needs refinishing. They have the tools, product, and experience to do it properly the first time.

If the quote is too much, then consider doing it yourself. Keep in mind, it will be very difficult to match the color of the floor.

This damage you have is wear and tear and shouldn't legally affect your deposit. In any case, follow what freddie or john smith said. Poly goes on in separate layers with a slight line in between the coats. It is very hard to blend without noticeable signs of a repair being done. That is the downside of poly. Tung oil may come up a little lighter than the rest of the floor, but you can try it and see how it comes out. If the area is not sealed first with the tung oil, you will wind up with mote depth in the wood than other areas of the floor due to the fact that the oil penetrates deeper that poly. So if you go the tung oil route be sure to not let it soak in to much.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.