Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wiping on amber shellac (thinning?)

Featured Replies

I am using some amber shellac on a vanity, and having a hard time getting a good finish because it tacks up so quickly. Would thinning it make it easier or harder to get a coat on before it tacks up? I thinned the poly, and I can't believe how much easier it was to get a good finish with that.

Spray it, thats the easiest way to work with Shellac that I've found. ;)

I am using some amber shellac on a vanity, and having a hard time getting a good finish because it tacks up so quickly. Would thinning it make it easier or harder to get a coat on before it tacks up? I thinned the poly, and I can't believe how much easier it was to get a good finish with that.

I've thinned shellac with denatured alcohol and wiped it on before, to decent results.

I've thinned shellac with denatured alcohol and wiped it on before, to decent results.

Agree on the denatured alcohol for thinning, works well.

+1 on the denatured alcohol to thin.

I always spray shellac (sometimes all over me, but that's another story). If you wipe and get streaks at all, remember that you can sand it nicely to a glass smooth surface with P400. I used wet/dry P400 on my last project. Kills the nubs and bumps. Even if any streaks or lap marks show after sanding, the final top coat will get rid of that.

As an aside, I usually buy an aerosol can of shellac for quick touch ups and small projects. Not worth setting up the HVLP for that (uhg, I hate cleaning it). Sure, per-ounce, it is more expensive than a quart of SealCoat, but very handy.

Like Paul, I spray, and hell yeah, damn happy to clean the gun :lol:, but I have read...the hand job guys... sometimes cut the shellac with rubbing alcohol (contains water which evaporates slower) to slow the dry. Never tried it...........like anything in woodworking/finishing applying shellac by hand takes practice. Thin light coats is the trick.

-Ace-

Like Paul, I spray, and hell yeah, damn happy to clean the gun :lol:, but I have read...the hand job guys... sometimes cut the shellac with rubbing alcohol (contains water which evaporates slower) to slow the dry. Never tried it...........like anything in woodworking/finishing applying shellac by hand takes practice. Thin light coats is the trick.

-Ace-

Ooh, that I will try; never thought of that. In AZ, anything to slow evaporation is a bonus.

Oh, uhm, some curious wording in there :lol:

Oh, uhm, some curious wording in there laugh.gif

Merely an effort stating how to execute or perform a certain task" :blink:<_<. :lol: :lol: :lol: :lol: :lol: :lol:

-Ace-

Bulls eye makes a thinned version of the amber to apply as a first coat. You do not have the tack problems with it. After that you can just apply a a regular coat of the amber. Just note that most of the shellacs you get are 3 or 4 pound cuts. I still thin these down to about a 2lb cut as it applies easier. The best way though is to spray it if you can.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.