Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

solid slab ash for my roubo

Featured Replies

well after looking at the plans ive rethought my order for wood instead of buying 8/4 ash and jointing and gluing the top and legs together im going to get the top in 2 slabs of ash.

so heres my lumber list

1-12" x 5" x 100" slab

1-8.5"x 5" x 100" slab

for the 2 top pieces

2-6"x 4" x 100"

for the legs

1-10"x 3" x 100" for the vise and end cap

and 8- 8" x 8/4 x 100" for the rest

i have a sawmill that i deal with that can get most any lumber i need very cheap the ash is going to cost $1.86bf

Thoughts?

well after looking at the plans ive rethought my order for wood instead of buying 8/4 ash and jointing and gluing the top and legs together im going to get the top in 2 slabs of ash.

so heres my lumber list

1-12" x 5" x 100" slab

1-8.5"x 5" x 100" slab

for the 2 top pieces

2-6"x 4" x 100"

for the legs

1-10"x 3" x 100" for the vise and end cap

and 8- 8" x 8/4 x 100" for the rest

i have a sawmill that i deal with that can get most any lumber i need very cheap the ash is going to cost $1.86bf

Thoughts?

That is an awesome price for thisck slabs of ash like that. That would be the way to go. Ash is great for this build. Flattening is going to be tough without a 12" joiner. Try to find some one with a 12" if you don't have one. Other than that rock out monolithically.

KAISER OUT

  • Author

the wood guy i got can get all domestics shipped anywhere most everything is $1.50-3.75 a bf 375 being kd hard maple kd soft maple is $2.20 cherry is 1.90 i think and so on and he ships! i just bought an 18x18x40 cherry burl slabbed to 2" for 50 bucks

the wood guy i got can get all domestics shipped anywhere most everything is $1.50-3.75 a bf 375 being kd hard maple kd soft maple is $2.20 cherry is 1.90 i think and so on and he ships! i just bought an 18x18x40 cherry burl slabbed to 2" for 50 bucks

Contact info? Link? TIA

  • Author

I will I wanna talk to him tommorow and work out a guild deal maybe.

I will I wanna talk to him tommorow and work out a guild deal maybe.

That would be great Jo. Let us know

well after looking at the plans ive rethought my order for wood instead of buying 8/4 ash and jointing and gluing the top and legs together im going to get the top in 2 slabs of ash.

so heres my lumber list

1-12" x 5" x 100" slab

1-8.5"x 5" x 100" slab

for the 2 top pieces

2-6"x 4" x 100"

for the legs

1-10"x 3" x 100" for the vise and end cap

and 8- 8" x 8/4 x 100" for the rest

i have a sawmill that i deal with that can get most any lumber i need very cheap the ash is going to cost $1.86bf

Thoughts?

I think the hardest thing is going to be the dog holes... unless if you are going to glue on the dog strip onto a slab just like Marc is doing. Otherwise I would go with round dog holes made with a router jig.

I look forward to seeing the slabs and the final product.

Jonathan

==============================

  • Author

I'm going square I'm going to glue the dog strip on to the front slab

  • Author

Murdock portable saw mill.

He is based in central north Carolina

Jack 9196691859

Jack@ncsawmill.com

Make sure to mention the wood wisperer guild for pricing

Murdock portable saw mill.

He is based in central north Carolina

Jack 9196691859

Jack@ncsawmill.com

Make sure to mention the wood wisperer guild for pricing

Thank you Jo..........Great resource!!!
  • Author

do you think i should just mortice in the square holes and just cut out the area for the tail vise and put an end cap on it and make the front slab all one piece and just get 2 12x5x100 slabs in lue of 1 8.5 for the front 12 for the rear?

would i have to put and end cap on a solid slab?

or could i just cut the area out and install the tail vise in the the slab?

My pile of ash has arrived yesterday.

What ash? All I see in the picture is the roadster and the wine cellar. Cool car!

Nothing wrong with big slabs. Only drawback being that big pieces are harder to move around. But even after the glueup of smaller pieces, you still need to move the giant lamination around. So bigger pieces just means less glue joints. At that price, I say go for it.

Well my ash turned out to be HEAVY. Amazing actually how the density varies between pieces.

Anyway with help from my mate Timi we got the two slabs milled and glued this weekend. The wife was happy as well as the 16 rabbits she has got to have loads of lovely new bedding.

The only downside was that I found out that my outfeed roller for the Jet has got damaged and there is a long wait to get a replacement. So I have bodged the tear in the roller with some silicone an we shall see how that stands up until a new roller arrives.

The small roller technique and dominos makes the glue up easy. Great idea on that Marc.

post-6278-0-82132900-1327334588_thumb.jp

  • 2 weeks later...

well seeing as there is some woodwork , or indeed bodging ( an old English term for a wood worker or turner but also can mean hastily repaired) in the car. Mainly in the boot ( which means trunk to you guys) I shall post some pics on my blog so you can warm your eyes on the flames whilst planing away.

anyone got a good project for the left over timber? I have around 40'.

blog. www.handmadeboxes.co.uk

The only downside was that I found out that my outfeed roller for the Jet has got damaged and there is a long wait to get a replacement.

Looking at your picture more closely, I just realized that you have a JJP-12. If you don't mind the derailment, how's that thing working out for you?

Here its called a 310 (must be mm in metric) but basically 12" wide. it is a great machine. i got it second hand, i think because the guy selling it couldn't set it up. before that i had an 8" Kity planer thicknesser and the jet is way out in a different league. i have now replaced the outfeed roller and run all of my tops through it one handed no problem at all.

I followed Marc's setting up video. and it seems fine.

The best thing about it is the ease of changing from planing to thicknessing. It takes seconds.

See if you can find one going on ebay.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.