Static_23 Posted January 29, 2012 Report Posted January 29, 2012 My Craftsman proffesional table saw came with a serpentine belt. i want to know if i should switch it out with a linked belt and turned pulleys to help with vibration. Quote
Dave's Not Here Posted January 29, 2012 Report Posted January 29, 2012 Actually, a serpentine belt will produce less vibration than a link belt will. If you're experiencing some vibration issues then double check your current pulley alignment. Quote
duckkisser Posted January 29, 2012 Report Posted January 29, 2012 check you blade it might be improperly imbalanced. just swap it out with a couple other ones and see what it does Quote
ChetlovesMer Posted January 30, 2012 Report Posted January 30, 2012 A new Serpentine belt shouldn't vibrate. If it's old and has worn spots or "bent" spots it might. Quote
duckkisser Posted January 30, 2012 Report Posted January 30, 2012 i still think perhaps your legs are not square to the ground like our floor is tiled so our table saw has to be place with legs in the center of 4 different tiles. or your blade is imbalanced try puting different blad in and checking the mountings for the blade that might be lose. start with the easy stuff then make your life hard. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.