kyleheon Posted March 2, 2012 Report Posted March 2, 2012 While I'm not saying I will do this I am curious if it is possible to upgrade the motor on my table saw to something a bit more powerful. I have a 10 year old Grizzly contractor saw that has a 1HP motor. It would be really cool if I could swap out the motor with a 2HP or 3HP one. Thoughts? Quote
knotscott Posted March 2, 2012 Report Posted March 2, 2012 If you can find one that's the same physical size and has the correct specs for RPM, rotational direction, duty rating, etc., something approaching 2hp should be doable. If the motor is too big it'll poke above the table when tilted. More than 2hp not only requires 220v, but will also put a lot of strain on the underpinnings of that saw that they weren't designed to handle. I'd stick with 1.5 to 1.75hp. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.