Eric. Posted May 6, 2012 Report Posted May 6, 2012 Yesterday I built a few cabinets and gave my dado blade and table saw a nice workout. My saw was making some odd noise when I'd start her up...kind of like how a belt will squeal when you start a car...only very briefly and it wasn't really a squeal, just a...noise...kind of hard to explain. I didn't really investigate it since the saw performed perfectly after the initial startup. No slipping or bogging down or symptoms of any other kind...smooth as butta once she got going. But anyway, it just got me thinking that a dado stack may be pretty stressful on our saws. Mine is a 3HP cabinet saw, so it's not underpowered (IMO), but that's still a lot of weight to get spinning that quickly compared to a regular single blade. Just wondering if anyone else feels like dado stacks may not be the best thing for our saws (not that I'm going to stop using it), and if anyone has had similar issues with them. Quote
dwacker Posted May 6, 2012 Report Posted May 6, 2012 When I got my pm2000 I ordered as a 3hp but quickly swapped the motor to a 5hp. The amperage draw with my 10" dado stacks was to much for everyday use. I think as long as you stick with 6 or 8", I wouldn't worry about it. Don Quote
rodger. Posted May 6, 2012 Report Posted May 6, 2012 My saw is well under 3hp (1.5 or 2, can't remember), and I use an 8" dado stack with no issues (but I don't use it often). I had problems when I ran it on a 15 amp circuit, but all the issues disappeared when I switched to a dedicated 20 amp circuit. Quote
markhochstein Posted May 6, 2012 Report Posted May 6, 2012 If you have a 10" table saw and use an 8" dado stack I don't think it's too hard on your saw at all as long as you're not trying to feed at a really fast rate. The 20% reduction in diameter has a substantial effect on the stress on the motor. Years ago I could have done the math, but not anymore. Quote
Eric. Posted May 6, 2012 Author Report Posted May 6, 2012 It is in fact a 10" saw and an 8" stack. And it's on a dedicated 220 circuit, so it should have plenty of juice. At the "appropriate" feed rate there are absolutely no issues with the power...it plows out the dados with no hesitation. It just seemed to me that it may be a bit stressful on the motor at startup trying to get that big ol' hunk o' metal spinning...like trying to drag race with a freight train. But you guys have me feeling better about it. Quote
dwacker Posted May 6, 2012 Report Posted May 6, 2012 Your saw should not start any differently with a dado. The 10" saw 8" dado rule of thumb only applies to arbor strength on cabinet saws. Motor load is used to determine true power, some can only take a 6". Most manufactures list max safe dado in manual, this has nothing to do with power only safe diameter. If your saw squeels then you have an issue. Either dado to big, bad belts or weak motor. The only sound difference is the blade noise itself. Don Quote
knotscott Posted May 7, 2012 Report Posted May 7, 2012 If you had a lesser saw, it might be a concern, but you're pretty well covered if the saw is running well. Even my first saw....a humble Delta 36-600 compact saw, spun an 8" Freud dado set without a whimper. Quote
Eric. Posted May 7, 2012 Author Report Posted May 7, 2012 I figured out what was causing the noise...like a moron I put the arbor washer on backwards, so I think the stack may have been slipping a little when I started it. I flipped it around and we're back to normal. Fortunately no damage to anything. Thanks for the input though, guys! Quote
shooterscott Posted May 14, 2012 Report Posted May 14, 2012 I'd say that like a couple others have said, your saw might be developing a problem I ran an 8" Freud set on an old Craftsman that was my grandfather's saw for many years prior to it coming to my home and it seemed to handle most of what I fed it. Quote
Eric. Posted May 14, 2012 Author Report Posted May 14, 2012 I'd say that like a couple others have said, your saw might be developing a problem I ran an 8" Freud set on an old Craftsman that was my grandfather's saw for many years prior to it coming to my home and it seemed to handle most of what I fed it. Read my last post. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.