Midtone Posted May 6, 2012 Report Posted May 6, 2012 Ok. I might be crazy, but I know I am not alone in contemplating the construction of homemade devices. For my purposes I am interested in making a spindle shaper. As you may well know it is one of the more expensive tools out there, but really nice for shaping table and chair legs among other things. Just wondering if anyone else has built one and what it took. I am thinking of getting a small motor, some belts and spindle and a spindle bit and having at it. I am in the R&D phase of this project and would appreciate any insight and help anyone has to offer. Quote
duckkisser Posted May 7, 2012 Report Posted May 7, 2012 what are you going to use it for? i would just ask yourself if you are going to use it on a regular basis and are you going to end up geting some money out of it? if the answer is no then you should move on and find a shop that has one to use when you need it. if you doing this just because you want a challenge then go for it. but the very few that i have seen they usualy end up being prity large(only seen industrial size) and most shops dont have the floor space for one Quote
mikem Posted May 7, 2012 Report Posted May 7, 2012 I would proceed only with extreme caution. The bits that a shaper swing around are large and heavy, so you will most definitely need to figure that in your overall design. The big question is, are you planning on doing large production runs of your various projects? If the answer is yes, I would seriously look into purchasing a used shaper. I see them frequently on craigslist. If the answer is no, I would consider getting a 3HP router, and build yourself a good router table. Regardless of which route you take the investment is going to be in bits, and will likely exceed the cost of any machine you buy/make. Shaper bits tend to be very expensive when compared to router bits. Again, factor the cost with doing production runs vs. one-off projects. Quote
fransikaner Posted May 7, 2012 Report Posted May 7, 2012 I don't know that I'd tackle such a project with all the different forces at play. There's a great site called WoodGears that highlights some homegrown machinery. You may find some ideas and inspiration there. http://woodgears.ca/index.html Quote
dwacker Posted May 7, 2012 Report Posted May 7, 2012 I wouldnt even try unless your capable of making it out of cast iron. A used shaper is easy to find. If you want more power than a router table even a small 1.5 or 2 hp shaper will give you that. Don Quote
Midtone Posted May 7, 2012 Author Report Posted May 7, 2012 After these warnings I am going to reconsider. I actually prefer hand tools. I just feel that a shaper would make things easier if I want to shape legs. Other wise I would use a bow saw (I do not own a bandsaw) and some smoothing with spokeshaves. I have yet to make a chair with curved legs and I am learning how to do this by hand. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.