Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Do you have a problem with metric Chisels?

Featured Replies

Reading The Anarchist's Tool Chest and something was pointed out that I was curious about. One of the reasons he doesn't recommend Japanese chisels is because they are metric. For those who use Japanese or other metric tools (especially chisels): does this pose a problem for you in a world of imperial wood sizes?

I don't think so. I rarely have something I'm paring that's the same size as a chisel. Cleaning sides of mortises isn't sized to a chisel anyway. The ends of a mortise can be better served with a mortising chisel sized to the width of the mortise, though, so the stout square sides clean the corner. But who is to say your mortise has to be in imperial sizes if that's the perceived problem. If you're using a tool to create the mortise, create it to a metric size if that's what you want.

I have a set of metric Narex chisles that I have used for years and I have never had any issue.

-Gary

The only time that having a chisel that was made to a specific size matters is if you are chopping a mortise in a groove. Then it's nice to have a chisel matched to whatever tool you used to make the groove (plow plane, router bit, dado head, etc.). And even then having a chisel that is very slightly narrower than the groove might make it easier to chop that mortise. You could always pare to final fit.

But that's really not a metric/imperial issue. That's just matching tool sizes. If you had a 6.1mm router bit and a 6.1mm wide chisel, they would work perfectly well with each other. And if you really had to, you could grind down the width of the chisel to suit your needs.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.