ScoFF Posted May 14, 2012 Report Posted May 14, 2012 The O2 metal versions are out, powdered metal to follow. What do you think? http://www.leevalley.com/en/wood/page.aspx?p=69619&cat=51&ap=1 Quote
Eric. Posted May 14, 2012 Report Posted May 14, 2012 They look pretty sweet to me, but for that price I think I'll just stick with my Japanese chisels. Quote
rodger. Posted May 15, 2012 Report Posted May 15, 2012 I have the original Lee Valley chisels, and I really like them. These look pretty nice though! Quote
RenaissanceWW Posted May 15, 2012 Report Posted May 15, 2012 I have been playing with them for the past few weeks. A friend of mine got a test set from Rob Lee and he lent them to me. Not bad overall. I'm more of an A2 fan but the O1 is quick and easy to sharpen. Personally I think the handles are too skinny and I like a socket handle instead. The fit and finish is excellent and the chisels were dead flat and ready to go from the factory. I'm not sure about the baked Maple handles. All I can think of are the shattered Maple baseball bats in MLB and find myself wishing for something like Ash or Beech. I'm not sure what the baking process does to the properties of the wood so it is possible that heat treating the Maple makes them more like a synthetic handle. I'll have to look into this more. The reality is that they will probably still take a massive beating before showing any wear. I don't know if I would want to mortise with them however, but that is what mortise chisels are for. Quote
Joraft Posted May 15, 2012 Report Posted May 15, 2012 Derek Cohen just did review on these chisels: Veritas Chisel Review Quote
ChrisG Posted May 16, 2012 Report Posted May 16, 2012 Here is my response from another forum... "I have a set of these. They are fantastic. Really REALLY fantastic. The backs are insanely flat all the way to the handle....total overkill but very nice. When you first pick them up, the handles feel quite different if you are used to longer, less curvy handles like on the AI chisels. I honestly didn't like the handles at first, but as soon as you start using them the handle design makes perfect sense and is very comfortable - tons of control and power. As Derek said, the side bevels are perfect for dovetailing. The edge retention is fantastic, and I really like that the 1/4 and 3/8 come with a steeper angle ground itno them. When I was testing them I deliberately used only the 3/8 and 3/4 so I could get a good idea of edge longevity. I used the 3/8 to chop a mortise in white oak, after I had use it to chop a set of half-blind dovetails and clean out the waste on two dados - it could still pare end grain (though not as prettily) after chopping the mortise. The balance and weight are the best parts. They look kinda heavy, but when you pick them up they are incredibly light and balanced feeling. It is really surprising and I couldn't quite wrap my head around it at first - the first time I picked up the 1" I laughed because in terms of weight what I saw with my eyes didn't agree with what felt in my hands. When holding them near the cutting edge for chopping dovetails the center of gravity feels very close to the work - my AI butt chisels, which were previously my favorite DT chisels, feel top heavy by comparison. The weird thing is when you pick up the LV chisels for a paring task they don't feel front heavy as you would expect given how low the center of gravity feels when you are chopping - when they are in your hand it feels as though the COG has moved up towards your handle and they feel very balance. It really bizarre and awesome...you'll have to hold them to see what I mean. In all honesty, if you already have a really good set of chisels, you certainly do not need to replace them with these, but if you are looking for a new set and have the budget these will be tough to beat... Like all premium tools they won't make you a better woodworker, but they are very much a plesure to use. They are every bit the chisel that the LNs are, and a choice between the two would come down to personal preference. My only complaint about them is that they come with a secondary bevel already ground into them, which too me, kinda defeats the purpose of a secondary bevel. Its an easy enough fix though. Also, I wish they had made a 1/8". Sorry to sound like so much of a fanboy, but I really really love these chisels. What else is there to say. Oh yeah....and the handles smell like maple syrup!!!" Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.