Recommended Posts

Posted

I just got the 2nd best Bday present (nothing beats homemade presents from my kids) from my Dad-a Woodriver #5! This was a huge shock since we never really exchange big presents with the exception being the kids. Anyways back to what you came to read, this thing is awesome. I have an old 604 Bedrock which I love but this is a step above. I am amazed at how the shavings just fly up out of the mouth, very impressive.planes like a dream and from the time I opened it till I was using it was about 30-40 minutes and yea much of that time was spend drooling!

Now for the question, I don't have a screwdriver long enough for the frog setscrews and adjustment screw. I went to the hardware store and found a $10 ugly screwdriver that would work if I did a lot of grinding on it to remove a large section of the flat for clearance and grind down the diameter off the shaft. I thought it would be nicer to make my own shaft and handle, my only concern is the handle being able to hold up to the rotational torque. How were the old ones done? If I make the flats too large on the handle end of the shaft getting it into the handle is going to cause and ugly area where it compresses the fibers. If I make the flats too small it won't hold then game over. I have a plan to take care of the compressed fibers by removing the ferule and installing a new one that would cover it. What thought do you guys/gals have? Thanks for your time and look forward to hearing from you.

Posted

I've made 3 types of screwdriver handles-- round, elliptical, and London pattern types... One of them is a "power user" and gets torqued pretty good.... much more torque than you'll ever use on a hand plane... that shaft is held in place with epoxy only... no additional "tricks" on others I have used epoxy and wedges, but that can look a little sloppy.

I say enjoy yourself and make what looks good to you, use some epoxy and a firm ferule and you'll be just fine for plane use

ps- have fun with the handle! For round, just turn it, for elliptical, do an offset turning (eccentric)... it's fun!) and for london pattern just saw off the corners and then turn the rest.

wwng4.jpg

screwdriver.jpg

wwng6.jpg

mallet2Small.jpg

Posted

Thanks for the resonse. I just didn't think epoxy would hold under that pressure. It looks like your were kits, am I right? I was planning on using steel rod and heating and flattening the end to form the tip. If I am looking at yours right the end that is pressed into the handle is curled, but it's hard to tell in a pic. If so that would be a big difference over a straight rod. I was planning on the london style (although I didn't know the name till now) I have some great tiger maple that will work great for the handle on the driver and for the plane knob and tote as well, stock handles just don't fit my hands very well. Thanks again.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   4 Members, 0 Anonymous, 36 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined