Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Can I finish over lacquer?

Featured Replies

I made a coffee table & a hall table about a year ago. I finished them with 3 coats of lacquer and they are already showing signs of wear. Anywhere that a cup is left has white rings in the lacquer. I have heard that a lot of people like Arm-R-Seal as a more durable finish. Do you think there is anything I can do to the tables without completely sanding down to bare wood and refinishing?

You want to make sure all the "rings" are out of it before you topcoat it. Apply a coat of dewaxed shellac then the varnish over that.

  • Author

Thanks Tim! Do you think something like Arm-R-Seal will be durable enough for a coffee table?

If this were me, strip the finish and start over. The table has been in service for about a year and has seen a ton of action. You never know what the finish has been exposed to which can cause you finishing issues. Dirt, oil, furniture polish, etc.

Solvent lacquer is typically a durable coating. Was this brushing lacquer or did you spray? I'm thinking you need to apply the coating a little thicker, for good protection.

Yes Arm-R-Seal is excellent for table tops. And always use coasters under drinks and hot pads for the obvious. No finish is that tolerant.

  • Author

The lacquer I used was a brushing lacquer. Usually we do use coasters but when company comes over they never do. This morning I noticed the legs of the table are starting to get little white spots also!?!? I have no idea what it could be from.

The lacquer I used was a brushing lacquer. Usually we do use coasters but when company comes over they never do. This morning I noticed the legs of the table are starting to get little white spots also!?!? I have no idea what it could be from.

The key to lacquer is sealing properly prior to the top coat. You may have had moisture in the wood or the finish is coming loose. If your seeing white spots that are not from known water damage I'd strip it with a chemical stripper and start over.

Don

I agree, you didn't mention the leg issue before. Since you're having both issues, I would consider stripping and refinishing it as Don mentions.

  • Author

Thanks Guys, I am pretty disappointed. The two tables are my first two projects. I guess I will be stripping them down and using a different finish. Thanks for the input.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.