scsmith42 Posted June 10, 2012 Report Posted June 10, 2012 I discovered this site earlier today while doing a search on finishing options for quartersawn oak. A member named "Blur" on Woodworkingtalk posted the link to the site, and I like what I see. My wife and I live on a small farm outside of Raleigh, NC. She is a veterinarian, and so a lot of rescue's pass through the farm. I'm looking forward to learning from others here, and to sharing the knowledge that I have about milling and drying lumber. Scott Quote
JerrySats Posted June 10, 2012 Report Posted June 10, 2012 Hi Scott Welcome to WTO nice to have you join the group here , there's a lot of very friendly and knowledgeable people here . That's a beautiful area you live in , I have some family around there . Looking forward to hearing more about the milling and drying of lumber . Quite a large log your standing next too in your profile picture . Regards Jerry Quote
scsmith42 Posted June 11, 2012 Author Report Posted June 11, 2012 Hi Jerry, thanks for the welcome. I was up in your area a few months back when I drove up to Bensalem to pick up a forklift for the shop. Lots of pretty hardwoods up there. Whereabouts does your family live? Our specialty is milling extra large diameter logs; we frequently mill between 48" - 60" in diameter, and sometimes beyond. The log in my avatar photo is a red oak that came from a tree blown over in a storm. That's actually the "small end" of the log in the photo. Quote
JerrySats Posted June 11, 2012 Report Posted June 11, 2012 Hey Scott I have one cousin on the over by the northern part of Raleigh and another down in Wilmington area. They run a meat packing plant in Warsaw Quote
scsmith42 Posted June 12, 2012 Author Report Posted June 12, 2012 Hi Jerry. Definitely a lot of packing plants in ENC. Based upon their location, I'll bet that they are in the pork business.... Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.