Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Old 8in Grizzly Jointer on C list? Good buy?

Featured Replies

I found a 8 inch grizzly 3 blade jointer on C list today. Im schedualed to go look at it this evening. Ive never owned a jointer but figure it would be a logical buy as I recently picked up Lunchbox thickness planer. Ive been watching for a 6 inch jointer but this one popped up for 250 dollars. I dont know the model number but it has 1 1/2 horse motor and wired for 220 8 inch wide bed. The seller suggested he had some extra blades. Check out the photo attached.

I know Marc has said go as wide as you can. I think my garage shop would just about fit this one with all my other tools.

Anything i should look for other than bad motor sounds or a racked bed? How do the older Grizzly tools rate?

I think I'm sold on it unless the community has any red flags. This is my first jointer so I think the price is really good.

post-5630-0-86657100-1340659029_thumb.jp

I'd bring some pine 6' 1 x 8's to face and edge joint. If they joint up nice and straight when put jointed face to jointed face, and jointed edge to jointed edge, with the edge and face 90 degrees all along the length, and there are no ugly motor noises or startup issues, I'd drop $250 on that in a heartbeat.

If you don't have the skills, ask the seller to joint your boards flat on one face, straight on an edge, with the edge 90 degrees along the jointed corner. You should be able to joint two boards and have a glue-up worthy edge. If neither you or the seller can do this, pass on the machine. Big box pine lumber should stay true long enough for a demo session. It might move before you get home, but it should work fine for a test.

BTW... I don't get hung up on fence angle stop accuaracy on jointers. I'm familiar with several 8" and some 12" "big brand" machines that change 90 degree settings with temperature changes and as they're slid back and forth on the knives. I adjust ALL jointers to the Starrett 6" combo in my pocket when jointing an edge. Check the fence just past the knives on the outfeed table, and at each end of the fence. When the first check is perfect, the ends should be very close.

Looks like it could be the G1018....~ 10 -12 years old. $250 for that is a steal IMO! It was a well regarded jointer, and came from the same Taiwanese factory as the Jet, GI, Sunhill, Bridgewood, Woodtek, and others of the era.

  • Author

Thanks guys for the info! The guy selling it was "clearning out" some old tools, his current jointer is a 16in Oliver. I'm pretty pumped on my new purchase, motor sounds good and things are in alignment. The only thing that doesnt work well is the spring in the blade gaurd. It doesnt close over the blades quickly. Something i've gotta look into fixing.

Buying the jointer gives me the oppertunity/reason to install 220 in the shop and rewire my Jet jwt-10!

The blade guard spring on my G1182 isn't overly "quick" either! IIRC, the G1018 had a 1.5hp motor and will run on 120v. Still, adding 220v is an excellent idea, so go for it if you can.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.