davestanton Posted July 13, 2012 Report Posted July 13, 2012 I have noticed a lot of people comment on the pros and cons of using a 4 inch line or using a 5 or even 6 inch line/main in their shop. I did a 1 Quote
fransikaner Posted July 13, 2012 Report Posted July 13, 2012 Loved the video, Barry. I don't know what that old man was having us on about, though. 1 Quote
Hybrid-woodworker Posted July 15, 2012 Report Posted July 15, 2012 Hi Dave, I found similar results going from a 4" drop to a 6" drop with my new cyclone. I have a box partly around my miter saw and with the 4" it did ok at taking away the dust that was directed to the back but there was a lot being thrown out to the front. With the 6" drop and the same box it creates a air current in front of the box and traps much more of the dust. I used a similar cyclone to yours for many years connected to a hard duct system and it worked better than the long pieces of flex. Long flex seems to be areal CFM killer. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.