Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vacuum Chuck or Longworth Chuck?

Featured Replies

So... I'm in a bit of a quandary and would like to solicit your opinions. When finishing up my turnings it can be difficult to get a good finish cut on the bottom and / or foot of the bowls or platters. In researching alternatives I still came back to two possibilities:

Has anyone had any experience with either of these? Even better, has anyone had experience with both? Having used neither I am seeking some guidance from the community at large.

Chris

I have not used either but plan to make both. I see the longsorth as useful for bowls and not much else. I see the vacuum chuck being used for platters, hollow forms, bowls. I think each has it's niche. My plan is to build a vacuum chuck first and see if it handles everything I want it to, then build the longworth if needed.

BRuce

I have limited experience with both in classes. As was stated both have their respective benefits. If you turn a fair amount of badly spaltted, punky wood, natural edge, or bark inclusions, the longworth is the way to go. You wont be able to maintain vacuum, Some of the natural edge, if its not really close you wont be able to catch with the longworth. JMHO

  • Author

Unfortunately it seems there is a valid case for both devices depending upon the material. Nuts......

Yep, one of those cases where you have to figure out what type of projects you will be doing and try to match the chuck to the project. I plan to do the vacuum chuck first but I know that I will doing " standard " bowls and platters, so it will be used more than the log worth.

BRuce

If it helps - with a router and tramel you can make your own longworth chuck out of plywood, some bolts and a small face plate. If you google you can download free plans to make it - I would start with it and then move to other chucks as needed by your projects.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.