Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Varnish

Featured Replies

I am unsure of terms here. What is a varnish compared to a finish. I know of lacquer and polyurethane as finishes. Is varnish a general term for the two? I was considering Mark Spagnuolo's video on varnish, anyone recommend?

Thanks

The video is quite good and I learned a lot from it. All of the finishing stuff can be very confusing and Marc breaks down his varnish finishing technique into easy to understand and easy to follow instructions.

I've always found that the terms "varnish" and "finish" are used inter-changeably; and in my opinion used a little too loosely. "Finish" is somewhat of an umbrella term that encompasses many different products that can be used to treat wood or any other surface. This could mean anything from lacquer, to polyurethane to water based products, shellac or even paint.

To me the term "varnish" means a more specific product; a blend of various oils, dryers, resins and solvants AKA a spar varnish (Epifanes, Flagship, etc). It's a traditional single part finish typically used on boats meaning that there is no hardener or catalyst added for it to cure. However a "varnish" is still a type of finish :-)

Where I see a bit of a grey area with the word "varnish" is that many people are also using this as an umbrella term. I've heard polyurethane finishes referred to as a 'varnish' as well as other water based products which to me isn't entirely accurate. Poly is poly, water based is water based and varnish is varnish. The phrasing of various finishes as a 'varnish' has always been a bit of a sticking point for me. But TECHNICALLY the way most folks use the term is correct (albeit confusing).

I typically refer to a specific finish based on it's primary ingredient(s). If it's oils (tung, linseed, etc) then I call it a varnish. If it's polyurethane then, well I think you get where I'm going with this :-)

I don't know if this helps or muddy's the water; I would actually like to see a lot of input on this post to further clarify what is technically correct as it is a somewhat confusing topic!

This is the point that I am trying to make. According the the cited article what I am taking away from it is that all finishes can be referred to as a varnish and that the two terms mean the same thing; when in actuality there are very distinct differences between finishes. Some have UV absorbers / inhibitors while others don't making some only suitable for interior use. Base components of each are very different and in many cases are not compatible with one another..

If someone were to say that they finished a piece of furniture with a 'varnish' what does that really mean? Was it a 1 part poly, 2 part poly, water based, oil based, acrylic, shellac, lacquer, epoxy, modified alkyd resin, etc??? According to the article it could mean any one of these. They are all types of finishes, but referring to something as a varnish does not give any insight on the type of material used.

I am not trying to be argumentative, just trying to understand. I routinely work with many types of finishes both on repair work (blending into existing finishes) and full refinishing and not using the proper material can be disastrous. In some situations the newly applied finish failing pre-maturely (not bonding), not curing or bubbling the material beneath it.

Again, I am not trying to create problems but I certainly understand the confusion of the OP :)

  • Author

That is where my confusion came in, I didn't know if people were using the term varnish loosely. The questions in my mind was; is it a particular type of finish? For example, "I finished my table with varnish not polyurethane."

By loosely, I meant as a general term, for example, "I drove my vehicle to work today." was my vehicle a car, boat, plane, etc. They are all types of vehicles.

Therefore, I don't believe you were causing problems, and I agree that the article does lack some specifics.

Thanks,

Aaron

I tend to break things down and refer to them in their basic form. To me, a "varnish" refers to a particular type of finish; specifically a spar varnish. An example of this would be a single part finish made by Epifanes or Pettit (Captains, Flagship, etc). As far as I know these types of finishes only go by one name. Varnish... No other way to refer to them.

Other types of finishes that I commonly see referred to as "varnishes" also go by other names because of their base components. For example a 'wiping varnish' is generally a polyurethane thinned down with mineral spirits. So, when talking about this kind of finish I'll call it polyurethane. Even 2-part "varnishes" that are made by Interlux and Epifanes are technically a polyurethane base mixed with a catalyst or a modified epoxy (respectively) that still require additional topcoats of a "spar varnish" for adequate UV protection.

If I had to guess I would say that general use of the name "varnish" is a marketing idea cooked up by the manufacturers to keep things relatable and familiar to the consumers. Everyone knows of the term varnish, but not many are as familiar with modified alkyd resins, linear polyurethanes, etc. The term 'varnish' is just easy..

Are consumers (woodworkers) incorrect when referring to these different kinds of finishes as 'varnishes"? No, I don't think so; because it's how the products are being marketed! But it does make it somewhat confusing :)

So to answer your Q I would say that unless someone specifically says they used a "Spar Varnish" I would look at the term 'varnish' as a loosely used synonym for finish.

But, these are just my opinions; right or wrong...

~Andy

I am unsure of terms here. What is a varnish compared to a finish. I know of lacquer and polyurethane as finishes. Is varnish a general term for the two? I was considering Mark Spagnuolo's video on varnish, anyone recommend?

Thanks

The term varnish and finish are not interchangeable. A finish is a class of materials that are used to 'finish' a piece of lumber for its protective or other properties. A varnish, as stated above, is a mixture of a resin and oil which can be diluted with a solvent. Polyurethane is a type of varnish composed of an alkyd resin and a polyurethane resin.

Another type of finish are oils, i.e. tung oil, which are not considered varnishes, but are considered to be a "finish".

Don't forget "spirit varnishes" in your journey of self-discovery.

Example, shellac dissolved in alcohol is a spirit varnish.

Blessings.

Don't forget "spirit varnishes" in your journey of self-discovery.

Example, shellac dissolved in alcohol is a spirit varnish.

Blessings.

In my mind, I was adding "spirit" and "journey of self discovery" and didn't see shellac coming at all. :D

  • Author

Friends,

Thank you for you help. Sometimes the journey is rough and spirits can be let down, but after all your work, you know have knowledge.Just don't try to french polish a twenty person dining table as your first project.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.