jtooley75 Posted August 21, 2012 Report Posted August 21, 2012 This may be a dumb question, but will a router plane work well with the grain to create a rabbet as long as I use a knife wall or score on the wood. I do not own a rabbet plane and want to make a rabbet by hand that is approx 22" lonny with the grain. Quote
James Finley Posted August 21, 2012 Report Posted August 21, 2012 It will work, but depending on the behavior of the grain you may need to keep scoring it every few passes. Better might be to define the wall of the rabbet with a saw and then use the router plane. Quote
RenaissanceWW Posted August 21, 2012 Report Posted August 21, 2012 The router will work but it doesn't do well with heavy cuts even with the grain. With the blade hanging down it isn't properly supported so chatter will creep in quickly. The fastest way to tackle it is like James mentions above: Saw the shoulder across the 22" length Use a chisel bevel down and mallet to whack out 90% of the waste Clean it up with a rabbet plane Alternatively you could saw both side of the rabbet and clean up with the rabbet. For that matter the whole thing can be done with a chisel if you aren't comfortable sawing. Mark out the rabbet with a knife then chop down the shoulder with the chisel and pare to a clean joint. Aren't rabbets fun? So many ways to do it with as many or as few tools as you have. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.