Peter Camposilvan Posted August 31, 2012 Report Posted August 31, 2012 Hey folks. I got a beaver 3800 6"jointer that won't turn over. The motor will turn over but when I connect the drive belt the cutter head won't rotate and bogs the motor down. The cutter head doesnt spin freely. Does this mean the bearings need replacing or is there other options? Also how would I go about replacing the bearings if that's what I need to do? Any advice would be appreciated. Thanks Peter Quote
rodger. Posted August 31, 2012 Report Posted August 31, 2012 I know there are a lot of folks on here that are good with machines, but you may want to pop on over to https://www.ridgidforum.com/forum/forum.php and post your question there as well. There a lot of mechanically inclined people on that board, and I always find them very helpful. Quote
minorhero Posted September 1, 2012 Report Posted September 1, 2012 Congrats on the beaver! It could be some incredibly bad bearings, or you could have a more serious issue. The cutterhead should turn easily by hand, is this not the case? I have restored a lot of old tools and my goto forum for all mechanical questions with old machines is owwm.org (Old Wood Working Machines). I can not advise strongly enough going there and posting your question. 1 Quote
Peter Camposilvan Posted September 1, 2012 Author Report Posted September 1, 2012 I removed the bearings and repacked them with grease. Seems to have solved the issue but I guess only time will tell. I actually scored 3 beavers (ts jointer and lathe). Thanks for the advice apple wood. Seeing as I am a member of owwm I will post over there aswell. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.