Firehawk Posted October 2, 2012 Report Posted October 2, 2012 Hi, I am expanding my shop and will be making several shop cabinets. I plan to buy a festool router to use with an MFT and guide rails. My question is either the 1010 or the 1400 preferred for use with guide rails? To my understanding the 1010 already comes with the guide stop for use with the guide rail, so I'm leaning that way. I'd sure like to hear from someone who has both and would like to know which one you like best. Also, does anyone know if the boom arm kit comes with a hose. A salesman at Woodcraft told me that it comes with the hose, although the festool catalog isn't real clear. Thanks, Mark Quote
STL Woodguy Posted October 2, 2012 Report Posted October 2, 2012 I know for a fact you have to buy a guide stop with the 1400, I wasn't aware the 1010 came with one (and I don't have my Festool catalog nearby), so someone else can confirm. The 1010 is popular, versatile and good enough for dados. On the other hand, it can't take 1/2 inch bits, which the 1400 can, has more weight, power and stability. You'll have to decide what fits you better. I wrote a pretty detailed review of the 1400 in the reviews area if you'd like to take a look at that. No, the boom arm does not come with the hose, not the regular one anyway. It comes with a short hose that is attached to the front of the CT to extend it to the back of the unit, your existing hose from your CT hooks onto that to ride up the arm. EDIT: Nuts, I realized I had made a slight mistake (on an original comment about the hose size) and went back to edit and the system wiped the rest of my comment. But I re-edited the above and it still answers the question. Quote
Bobby Slack Posted October 3, 2012 Report Posted October 3, 2012 OF1010 is better if you are going to use the boring jig for adjustable shelves. OF1400 you can do a lot more adjustments and use a shank up to 1/2". I have both and hardly use my 1010 Quote
Bobby Slack Posted October 3, 2012 Report Posted October 3, 2012 OK. If this is your first Festool router, I would suggest to go with the 1400. It is more versatile and has better adjustments. Good luck with your decision. Quote
JimB1 Posted October 8, 2012 Report Posted October 8, 2012 I went with the 1010, lighter and more maneuverable then the 1400. I'd say for dados and edging hardwood the 1010 works perfect. I've made a few signs with it too and the lightness is a big plus. I haven't bogged it down yet... so far it's worked great for everything I need to do by hand. And yes it does come with the rail guide... I have a Freud router that i've had for years. It is difficult to use by hand and has several issues that made it actually dangerous to me (sliding off switch clogs with dust so it won't shut off, speed knob has the same problem, plunge base can get sticky, etc) so for a long time I didn't use a router by hand, only in a table (which negates most of the issues and makes the Freud usable). The 1010 is worlds better and actually pretty fun to use compared to the Freud so the Freud stays relegated to table duty and the 1010 is used for everything by hand. I just used it last night to make some hinge recesses on a box I was repairing. I looked at the 1400 and it's nice as well. I didn't go with it because the majority of my bits are 1/4" and the 1/2" shanks I do have are wide profile bits that I only use in a table anyway. I also liked the weight and controllability of the 1010. I haven't been disappointed yet. -Jim Quote
Bobby Slack Posted October 10, 2012 Report Posted October 10, 2012 Signs? I would be interested to see that. Post some pics pls when you can. Quote
JimB1 Posted October 10, 2012 Report Posted October 10, 2012 Signs? I would be interested to see that. Post some pics pls when you can. I should have taken some pics before I gave them away I guess. I never made one before and they were freehand practice with the new router I can make another one pretty easily though. It only took like 15 minutes each to freehand them. Nothing fancy, just ran around the edge with a profile bit and drew out the characters on the wood for me to follow with a v-groove or core box bit. I've been thinking about the signcrafter stencils and stuff but I just don't make enough signs to make it worthwhile to spend the money. I can make a quick sign if you really want to see how it looks. I'll look in the scrap bin when I get home to see what I have by way of pieces big enough for signage... -Jim Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.