Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

New Miter Saw Station

Featured Replies

I have been using a mobile cart for my miter saw the past several years, the problem is I never move the thing so mobile is a waste of space. I bought some tool cabinets at Sam's Club and made some mods for hight so the top of the long cabinet is flush with the cutting deck of the Kapex. Today I'm making a fence with Kreg measuring system. Trying to come up with ways to easily position the fence accurately and quickly for use and remove it when not in use. Any suggestions such as t-track or ??

post-6663-0-08447700-1349963998_thumb.jp

Dowels and rare earth magnets in the bottom edge? Hinges and fold it back and flat? If you use it a lot, then make it permanent and use the space behind as a "tool well",a otherwise known as a catch all. :-)

BRuce

I think you should just have a board that sits flat on the bench and up against the wall with your adhesive measuring tape attached to the bench(not the removable fence) calibration should be more accurate this way.

  • Author

Thanks for the responses, I have come up with a system that I think will work well and be fast to remove and reinstall. I made it from solid maple and the finish isn't dry yet, as soon as the finish is dry I will post some pics.

what i would do it have a depresion cut into the wood top of your tool cart. then have your fence fit into that depresion and mount it to some hinges. have some bracing arms that lock into place on the back. when not in use you can lay it back in the depresion and pop it up and lock it when you need to cut some wood. then you wont have a loose fence floating around the shop. by the way how do you like those cabinets?

That is really a sweet miter station setup. I love the cabinets.

  • Author

Here is what I came up with. The fence is made form solid maple, I had plenty left over from my Roubo build.

post-6663-0-18807100-1350059589_thumb.jp

The left hand end of the fence is held in place with a simple stop block and dowel rod. Just line up the dowel and push it against the end of the bench.

post-6663-0-63788000-1350059731_thumb.jp

The right hand end is held in place with a threaded insert which I screwed into the bench top. Simply screw in the lock knob and the fence is held in it's proper place.

post-6663-0-11601200-1350059829_thumb.jp

I have now added another hole in the left end of the bench and another threaded insert on the top right end of the bench locating the fence all the way to the back of the bench. Just remove the knob and position the fence to the rear of the bench so it functions as a back stop so things don't fall off of the back of the bench. And it can be changed from back stop to miter fence in about 10 seconds and the measuring results are dead on accurate. I bolted the two cabinets together so there is no movement of the cabinet holding the saw with regard to the in-feed bench. Now I have to build some type of material support for the right hand end of the saw that is also removable so I can access my dust collection system.

  • Author

These cabinets were a fair amount of work to assemble and they are decent quality. They are not SnapOn toolbox quality for sure but they are much cheaper too. I think I will be happy with them for many years to come. I may add some home made drawers to the center section of the long cabinet, not sure on that yet.

Nice setup Steve! You might have inspired me to do something similar.

  • 2 weeks later...
  • Author

post-6663-0-81588800-1351224081_thumb.jp

Finally finished the right hand end of my miter station. It has to be of a open nature so I can dump the dust collection can of my cyclone. I made it from left over maple from my Roubo build.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.