jimmykx250 Posted September 10, 2010 Report Share Posted September 10, 2010 I just had my joiner blades sharpened for the first time. Im assuming the blade tips should be flush with the outfeed side of the table. I noticed a jig for sale the had an offset. Not sure I gert that? Thanks for any help. Quote Link to comment Share on other sites More sharing options...
bullson Posted September 10, 2010 Report Share Posted September 10, 2010 it is a good idea to have the highest point of the blade just a fraction above the outfeed table just give u a better cut, it was how i was shown and it works ok 4 me if u need anymore help look up one of marc jointer set up video for indepth anaylsis Quote Link to comment Share on other sites More sharing options...
Onboard Posted September 11, 2010 Report Share Posted September 11, 2010 I just had my joiner blades sharpened for the first time. Im assuming the blade tips should be flush with the outfeed side of the table. I noticed a jig for sale the had an offset. Not sure I gert that? Thanks for any help. Jimmy, in regard to the jig with an offset, can you send a link for that? Thanks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.