Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Arm-R-Seal Satin over Epifanes Clear Gloss?

Featured Replies

I'm finishing a walnut kitchen island, and I'm just about to put on my 5th coat of Epifanes Clear Gloss, which I want to follow-up with a satin topcoat. I have a can of Arm-R-Seal Satin, and I'm wondering if anyone thinks I'll have problems putting it on over the Epifanes (or even mixing it with the Epifanes, to get the satin look I want. Thoughts?

I don't know about compatibility of the two, but Epifanes makes a satin varnish (they call it rubbed effect). It has no UV protection so it's really intended for interior use. Product info HERE Thin roughly 10% with mineral spirits and apply as you did the gloss..

I know that you can put Arm-R-Seal over a coat of shellac with no issues as shellac seems to go over or under anything. You could put a shellac coat over the Epifanes and then put the Arm-R-Seal over the top. Best to try on a little scrap beforehand.

I would not recommend doing this and will probably give you issues down the road. Listen to Boatworks and is what I would do. You could send the folks at Epifanes an email. The will be more than happy to suggest the best approach using their products.

-ACE-

  • Author

I don't know about compatibility of the two, but Epifanes makes a satin varnish (they call it rubbed effect). It has no UV protection so it's really intended for interior use. Product info HERE Thin roughly 10% with mineral spirits and apply as you did the gloss..

Thanks! I went and picked up a can of the Rubbed Effect Varnish and gave it a shot over the weekend. It looks amazing, and it's a urethane varnish so it should have a bit more chemical resistance than the clear gloss. It wasn't cheap ($60 for a quart at my local, consistently overpriced West Marine...) but at least I can use the leftover varnish to refinish some of the wood in the cabin of my sailboat....

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.