Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Staining poplar to match oak ?

Featured Replies

Have any of you had any experience trying to stain poplar to resemble or match oak?

Obviously the grain wouldn't even be close but color-wise, have you had any luck?

I've managed to closely duplicate the tones of both cherry and mahognay on poplar, but they are both much darker and more red.

I'm just wondering how well one can duplicate the light browns of oak?

If you're trying to match red oak, why not just buy red oak? It's pretty cheap. Can't imagine you're trying to match QSWO, as you'll never replicate the ray flecks.

  • Author

My mother has a small oak table that was water dammaged and the guy who repaired it used poplar. I'd like to try and match the colors so that it's doesn't stand out quite as badly.

If that becomes too much of a problem I may end up removing the poplar repair and replacing it with another piece of oak. (That may be the best way to go anyway).

In any case, I'm just curious as to what others have experienced along these lines.

This furniture repair type person was obviously in a class all by himself. As far as staining poplar, it's hard to stain poplar to look like the other end of the same board, much less oak. If you can faux finish it you have a chance, otherwise replace it with oak.

I am not sure on the shaping of the table, but another option could be to veneer the poplar with oak. Most big box stores carry oak veneer, though if you can wait a week or two, its much cheaper online. So you could sand the poplar down a bit so the veneer sits flush. I would buy some oak trim to put over the joint from the veneer to the oak on the table too. Joining veneer to the real thing is a tough match to make perfectly.

Good Luck!

  • Author

The issue is on two of the "feet" of the table, right down at floor level. You can see the poplar if you look at it, but my Mother keeps that side towards the wall and it's not too noticeable.

A Guy down the street from her did the repair. At the time I was 1300 miles away, not convienent.

I'm thinking that it'll be just as easy to remove the poplar pieces and replace them with oak. I'll probably take care of that for her over the holidays.

I guess the original intent of my querry was to find out if anyone had attempted to mimic oak with poplar. I've done plenty of finishing over the years and I've never tried it. I was just wondering if anyone had any expereince along this line?

I guess not, based on the responses here. Which is perfectly reasonable considering the equitable cost of oak vs poplar. Why bother when you can just use the real deal?

Thanks for all your responses guys. I appreciate the feedback.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.