Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Restoring Old Sewing Cabinet

Featured Replies

I just bought an old treadle sewing machine & cabinet and I want to restore it. Most websites I've been to recommend redistributing the finish with an appropriate solvent, but I don't think that's possible with this particular piece - at least the top. Its pretty chipped up and some of the veneer has fallen completely off. The few sites with complete refinishing instructions usually have pieces that were left outside or in barn and are pretty far gone. I'm trying to find a happy medium. If I leave it as is, chips and all, how do I seal the bare wood areas to prevent further deterioration? Or can I simply refinish just the top surface, which has almost all the damage, and it still match the older sides? Or is my best bet to strip & refinish all of it? Here are some pictures after cleaning with Oil Soap. You can see the front (and sides) are in way better shape than the top. Any advice or opinions would be greatly appreciated!

post-7751-0-68388200-1353082644_thumb.jp

post-7751-0-92563900-1353082759_thumb.jp

Word of caution: I'm not a refinishing expert. (Or even a n00b...)

If it was mine, I'd strip the finish off the ends (left and right) on the top, and try to salvage that portion. The center, that I presume is the fold out lid (does this one fold back or to the side?) I'd scrape off the old veneer and try to match the color with some form of new burl veneer.

But that's me. not having a clue how to go about doing this.... I'm going to sit back and watch the options come in now.

  • 2 weeks later...
  • 6 months later...

I would try Howard's refinisher. It comes in little cans and they have different colors. It does dissolve and redistribute the old finish as well as adding some new color. If you have loose edges you can chase a little glue under using a piece of paper. Be extra careful cleaning up any excess glue and squeeze out, it does not take color well. If you can clamp it that is best, but you can use an iron to set the glue (do some reading on how to do this and be careful). You can put extra on the bare spots to help blend them in. I have also used furniture touch up markers on the bare spots, I start with a much lighter color make a small mark and smudge it with my finger immediately. A rag might work but you have to be quick or it dries. It takes some practice but it works pretty good if you are not going for a complete re- veneer and refinish.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.