RossC23 Posted November 18, 2012 Report Posted November 18, 2012 Hey guys, Here is my situation. I work at a place where i have basically unlimited resource to hard maple lumber and i also work with jatoba often. the lumber is surfaced to 15/16". I usually get my material down to 3/4" with my dewalt 735. Hard maple and jatoba seems to take forever to get there on my current planer even with sharp knives therefore i have been contemplating going a little larger. Something like the grizzly 15" with the spiral head. My question is" "will this type of planer save me any time? Can i take more material off per pass?" any help is appreciated. Thanks. Quote
TRBaker Posted November 18, 2012 Report Posted November 18, 2012 Ross, I have the same planer in my shop and find that for most stuff it works great. However, when I work with really hard woods, I go over to my buddy's shop and use his Griz 20". The extra hp allows me to take a deeper cut without bogging down the planer. The Dewalt tends to pop a cork if you put it under too much of a load. Then you have to open it up, pull your board out, hit the reset button and but it back to the same setting. On top of all that, when you finish the job, your sharp knives are no longer sharp. To answer your question.....Yes, the bigger stationary planer with a spiral head will DEFINITELY save you time. Quote
rodger. Posted November 19, 2012 Report Posted November 19, 2012 I have a 13" planer as well, and am contemplating a larger unit that offers greater stability and faster feeding rates. I'll keep my eye on this thread. Quote
stahlee Posted November 19, 2012 Report Posted November 19, 2012 I have a Grizzly G0634z which is a 12" combo machine. While you're talking about a larger machine, my G0634z has 5hp with a spiral cutterhead and has no problem removing a LOT of wood in jointer or planer mode. I believe max depth for the planer is 1/8". Point is, those larger machines, like the 15" you were asking about, can indeed remove a bunch of wood per pass. I would recommend getting a spiral cutterhead. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.