RossC23 Posted November 25, 2012 Report Posted November 25, 2012 Hey Guys, Just wondering if anyone has used the kreg precison router table as a jointer. I have a table on order and am hoping to use it as a jointer. If not, a jointer will be on my christmas list. Thanks, Ross Quote
rodger. Posted November 25, 2012 Report Posted November 25, 2012 Router tables with a split fence can be great for edge jointing short pieces. The problem you will run into is when you want to flatten the face of a board. A simple table saw jig will also do an excellent job of edge jointing a board, so you may not need to wait until your router table arrives. Just google "Table saw jointing jig" and you'll see many easy to make designs. To flatten a face, you will need a jointer or handplane. Quote
rmac Posted November 26, 2012 Report Posted November 26, 2012 To flatten a face, you will need a jointer or handplane. Or a planer and a sled. -- Russ 1 Quote
STL Woodguy Posted November 26, 2012 Report Posted November 26, 2012 I don't have the table, but I have the Kreg fence. It does an admirable job of it, shims are included to lift the outfeed side. Make sure both fence faces are tightened down good and checked for co-planar, I've had a few situations with normal routing usages where the board 'snagged' on the outfeed fence and refused to let me move forward, dinging up the fence corner a bit. Franklin already said everything on the topic, it's good for edge jointing in a pinch, but absolutely no good for face jointing. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.