ChetlovesMer Posted December 13, 2012 Report Posted December 13, 2012 I'm I the only one who thinks this is a terrible idea? I heard through the family grapevine that a well meaning loved-one planned to get me one of these for Christmas. I raced to my local box store to check it out. I don't get the point? You still have to pull a trigger (technically push) and then the thing will run based on which was it's leaning. Huh? Appearently I must me either the least coordinated person on the planet or the most. Because playing with it in the store I found it to be infinitely more difficult to drive screws with than a standard battery powered screwdriver. Now I understand it isn't supposed to replace your "go-to" drill, and certainly doesn't have the torque for big jobs. But I have a little 7.2volt dremel screwdriver that I use for quick around the house stuff and it works great. I can easily feather the speed, I've never experienced any unusual fatique. With this B&D thing I still have to hold a trigger down. So what's the point? I understand the just lean it and it will go thing, but why would I want that? With my current screwdriver I hold the trigger down and it goes. I don't have to lean it. To me that's one step fewer and the GYRO feature actually makes it harder to use. In addition, With the GYRO you can NOT lean into a screw that's pointed straight down. So for everyone who puts something down on a bench or a table and starts the screw, with the Gyro you have to hold that piece up-right to start the screw. God forbid if you want to lay on your back and reach around behind the plumbing to tighten something under your sink. Working at any strange angle is nearly impossible and above your head is out of the question. The only thing I could think of that would be a good use for this thing was if you always drive screws horizonally, at eye level, and you constantly change their depth. "Put that in a little deeper... Oops, too much! ... back it out... No not that far! ... Put it in a little deeper! ... Stop, oh you missed it, back it out... No, not so much! drive it in deeper.... back it out... deeper... shallower... deeper... shallower... etc..." Please somebody respond to this thread who can figure out why this thing exists. Somebody tell me this isn't the worst invention since the "Shake-Weight". Quote
Beechwood Chip Posted December 13, 2012 Report Posted December 13, 2012 It seems like a useless gimick to me. shows that you can use it vertically and at angles. It apparently triggers based on rotation, not "leaning". You rotate the handle in the direction that you want the driver to rotate, after pressing the "activation button". I prefer triggers to "squeeze grip" switches. I find that the squeeze grip is difficult to control, and in the video you can see the light blink on and off, so apparently that guy also had trouble with it. Advantage - it's really obvious which way to rotate it for clockwise or counter clockwise driving. Disadvantages - It's less obvious which way to rotate it to drive in or back out a screw, as opposed to a forward/backward switch. - If you are unfamiliar with the tool, it's not obvious at all how to control it. Quote
ChetlovesMer Posted December 13, 2012 Author Report Posted December 13, 2012 - If you are unfamiliar with the tool, it's not obvious at all how to control it. Ah-ha, thanks for the video. Clearly, I must have had my press the button/rotate the tool timing backwards because I could only make it work right in front of my face with my arm horizontal. Even after watching the video. I still struggle with seeing the big advantage. Quote
Chris H Posted December 13, 2012 Report Posted December 13, 2012 Please somebody respond to this thread who can figure out why this thing exists. Somebody tell me this isn't the worst invention since the "Shake-Weight". I think you are out thinking their target audience. I typically see this thing being advertised while watching a DIY show. You know, the one where the home owner decided they were going to renovate their ______, but then realized shortly after demo that they have no idea how to function any tool more complex than a hammer. I assume they are targeting buyer who thinks ahead about that much! Though I guess it's a bit telling of my sense of humor, because no matter how many times I watch someone electricute themselves...it's funny everytime! Quote
ChetlovesMer Posted December 13, 2012 Author Report Posted December 13, 2012 Though I guess it's a bit telling of my sense of humor, because no matter how many times I watch someone electricute themselves...it's funny everytime! You're right, that is funny. I also like when they decide they need to take down or move a wall so they just start beating it with a sledge hammer. Then "Oh my God, I didn't realize the water supply to upstairs runs inside this wall." I always wonder if its set up or if the home-owner really is that ignorant? Quote
Dave F Posted December 13, 2012 Report Posted December 13, 2012 I could see it being of some use in tight spaces where a full sized power or regular screwdriver might not fit.... other than that I see no use for it. Quote
robjeffking Posted December 15, 2012 Report Posted December 15, 2012 The gyro has become more popular since handheld electronics have made the technology cheaper. In this case the technolgy is a drawback in tight places you may not be able to rotate fully to make it operate according to user reviews. This is the screwdriver I use that replaced my flexible shaft screwdriver the skil 2354-02 iXO the right angle attachment allows me to drive pockethole screws in very tight places. BUT I paid for mine and yours is FREE so enjoy it Im sure it will find a good home in your toolbox. Quote
pghmyn Posted December 15, 2012 Report Posted December 15, 2012 It will probably come in handy somewhere, but I can't really name a place right now. Quote
Dave's Not Here Posted December 15, 2012 Report Posted December 15, 2012 Like most of the gimmicky tools that are introduced during the holiday shopping season I doubt if this one will catch on. The main reason for that being that those tools just flat out don't work very well. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.