Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Edge Gluing Veneer Substrate

Featured Replies

I have some small pieces of light and dark veneer left over from a jewelry box project that I thought would make a great looking chess board. The only veneering I've done is using whole pieces on a panel; that is to say I've never done any bookmatching or used veneer tape. To avoid fooling with 64 little squares that I'll never tape straight anyway, I want to use the "cutting board method" to make my board (see Marc's cutting board video if you don't know what I'm talking about). I figured I could glue the veneer to one piece of substrate, cut my strips and make the checkerboard, then once I had that layer glued up, glue a "solid" piece of 1/4" ply or MDF underneath to make the board about 1/2" thick. Then I can frame it with solid hardwood and an inlay strip. The pic demostrates the three layers I'm wanting to glue up, without the frame (nevermind the number of squares being wrong).

My question is this: which glue and substrate should I use for the edge gluing? Will plywood and yellow glue work, or should I use something else? It seems that edge gluing MDF would not hold up well. Keep in mind that the edge glue only has to hold long enough to get the checkerboard done, then surface glue it to the bottom piece of substrate. I don't want to use solid wood because I want to frame it with hardwood. I can't have this thing bust out my mitered frame next summer!

Thanks for your advice in advance,

TimberDoc

post-3814-0-10300900-1356565992_thumb.pn

I think the first problem you need to solve is how to glue the checkerboard part together so that the surface comes out perfectly level. Because if it doesn't, you're not going to be able to correct it as you would with a real cutting board because you'll sand right through the veneer.

-- Russ

How about if you start by using the "cutting board method" on just the veneer by itself? That way you would be dealing with just eight strips of veneer at a time rather than 64 little squares. Then you could apply the veneer all at once to a 1/2" thick substrate and live happily ever after.

-- Russ

Found the video this has several parts to it, I found it interesting

  • Author

How about if you start by using the "cutting board method" on just the veneer by itself?

I never thought about doing it that way. The video makes it look pretty simple though. I think I'll try that. Thanks for everyone's input!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.