Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

need help asap..

Featured Replies

hi there

doing a 55 piece cabinet job...maple...stripping existing urethane off (has old coat of honey stain on under urethane)

customer chose dark brown and gave me spec to buy stain and do sample

i stripped one door..took off urethane and sanded...left the old honey stain in tact. two applications of waterborn brown stain by brush...(no conditioner)....wiped off stain both times...brushed on 3 coats of latex clear satin varathane...showed customer sample....she loved it....therefore got the go ahead for 55 pieces.

question: should i continue to *not* condition the remaining pieces?...sample piece not blotch...but almost...if that makes sense.

question #2) my apprentice sanded s a few cabinets right down to bare maple...sanded out entirely the honey stain left from previous application....so these 3 cabinets...(center panel) are the odd guy out....should i restain these panels honey....*then* switch to dark brown...so that the starting point is the same for all pieces or should i just hit the bare white maple center panels with the dark brown an extra time (3 coats)?

hope that all made sense...thanks in advance..

evets

  • Author

hi there

doing a 55 piece cabinet job...maple...stripping existing urathane off (has old coat of honey stain on under urathane)

customer chose dark brown and gave me spec to buy stain and do sample

i stripped one door..took off urathane and sanded...left the old honey stain in tact. two applications of waterborn brown stain by brush...(no conditioner)....wiped off stain both times...brushed on 3 coats of latex clear satin varathane...showed customer sample....she loved it....therefore got the go ahead for 55 pieces.

question: should i continue to *not* condition the remaining pieces?...sample piece not blotch...but almost...if that makes sense.

question #2) my apprentice sanded s a few cabinets right down to bare maple...sanded out entirely the honey stain left from previous application....so these 3 cabinets...(cener panel) are the odd guy out....should i restain these panels honey....*then* switch to dark brown...so that the starting point is the same for all pieces or should i just hit the bare white maple center panels with the dark brown an extra time (3 coats)?

hope that all made sense...thanks in advance..

evets

couple of other questions:

the dark brown stain was waterborne....i noticed that when i was starting to wipe it off almost immediately after having brushed some onto a cabinet...that it already started to set up (dry)...and wiping it down was almost not working.....should i switch to oil based stain for this? also...i envision spraying the stain first then wiping it down (55 pieces both sides)....smart idea or should i being using gel and wiping it on?

also...i plan on finishing by spraying 1-2 coats latex or solvent based low sheen lacquer...thought?

Once they approve a sample, you don't want to change horses in mid-stream. As far as the apprentice goes....40 lashes is in order. I would get some scrap maple and try starting with a honey stain before you just attempt to do a whole cabinet. If it doesn't work on the scrap, you are only out one piece of scrap. If it doesn't work on a cabinet, you're worse off than when you started.

I would never do a job like that without a chemical strip and sand. Id use a water based dye to even the tone on all the pieces, then come back with an oil based stain to achieve final color prior to spraying with solvent based lacquer.

Don

I would almost always follow TRBaker's advice, however in this situation, you may want to prepare a sample without the honey and see what the customer prefers. Show them both, side by side. I would even push the clean (no honey) sample. You are going to run into issues with aged lumber where the new stain is going to take differently peice to piece based on the original application, the partial sand, and the years of use.

I think you are going to have issues trying to match a stain that is potentially decades old, so you may be best to strip them all down to just wood and then apply whatever combo of stains the customer wants.

I concur with dwacker, trying to remove some, but not all finish is incredibly difficult.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.