Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Painting plywood

Featured Replies

I am looking to start a new cabinet project that will be painted. Plywood is going to be used for the case work. I want a smooth finish but don't want to use mdf. What plywood have y'all had good luck with and what finishing technique did you use. Birch is my first guess but I didn't know if I can get a smooth finish like mdf. Any thoughts will be helpful. Thanks.

I use birch ply and prime with sherwin Williams wall and wood primer. The primer sands really well and leaves a smooth surface.

Another option is to use MDO: it is plywood core with the outer 'plys' made of MDF. Paints like a dream, works like ply. Sign shops use it to death so if you can't find it at a local lumber/construction yard, go to a big sign shop in the area and ask them where to get it (or buy from them). Just make sure you get two-sided MDO (an MDF ply on both faces) as there are single-sided MDOs out there and sadly it is all I could get locally when I needed it.

I like to use birch and poplar for all of my paint-grade cabinets. I prime with Sherwin-Williams 101 oil based primer. When you hit it with 220 grit it comes out like glass.

I was going to ask the same question but for kitchen cabinets.

I saved a copy of Ask This Old House where they showed a woman how to paint her kitchen cabinets white.

It was a several stage process, not just priming and painting.

There seems to be a trend where white cabinets are gaining favor over stained cabinets.

This appears to be the case in higher end kitchens.

Builder's grade cabinets can be made of particle board.

They just glue a veneer panel on outside cabinets and use hardwood for doors only.

Particle board takes paint differently than real wood.

If you have to paint particle board, coat it with a thin coat of drywall mud first and sand it off. That fills in all the pits and will give you an excellent base for your primer coat.

Troy,

Interesting...never heard that before.

My kitchen cabinets are particle board but covered with a paper that has a wood grain design.

I assume other builder's grade cabinets made of particle board have this "wallpaper" glued to the inside of the cabinets to dress them up.

The paper is shiny smooth, but I'm not sure how it will take paint.

Had the housing market not tanked I probably would have replaced these cabinets, but as things stand I've had to curtail upgrades in order to realize a decent profit on the dwelling.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.