berdman Posted January 25, 2013 Report Posted January 25, 2013 Has anyone here installed one of these? How has it worked for you? Quote
tdale51@yahoo.com Posted January 26, 2013 Report Posted January 26, 2013 Are you talking about the Dust Deputy? If so check out Marc's video on the subject, He did a good job comparing 3 or 4 different types of chip separators. Here's the link. http://www.thewoodwhisperer.com/videos/cyclone-separator-shootout/?category_name=the-shop%2Ctool-setup%2Creviews Quote
CT Proctor Posted January 27, 2013 Report Posted January 27, 2013 The Dust Sentry is different than the Dust Deputy. The Sentry is just a proximity sensor hooked to a light to tell you when the DC container is full. I don't have any experience with it, my Jet DC has a clear bag, but I don't see why it wouldn't work just fine. Quote
R Jones Posted January 27, 2013 Report Posted January 27, 2013 I have had one for a year or so and well IMHO it's a waste of money! Works fine for chips but any dust, it will get covered and not work! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.