Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Charles Neils pre-color condition ... oil stain

Featured Replies

I am trying to stain a Maple mantel dark. I have a custom color in OLd Masters wiping stain. I have tried the 1# cut sealcoat method and it had helped the blotching just fine. I am having issues getting the color dark enough. I am told I can seal over the stain and add stain again. But this is getting too thick and I do notlike the apperance as too much grain is lost.

 

Charles Neils product is interesting but all the samples and video I comes across are using water based dyes. Has nayone used the product with oil based pigmented stain? are the results and better than the cut shellac as far as using oil? I know I can use the GF gel stain but its not my color. thus the Old Masters and the Old Masters gel stain is different than the GF. I am told no urethane in the OM gel stain

I haven't tested that exact stain but I have had success using other oil stains and gel stains. I have heard, however, that there are folks who have had trouble with some oil based stains. Which ones, I can't be sure. The product definitely works at its peak when used with water-based stains and dyes. But again, I have had luck with several General Finishes products. If it does work for you, you'll be far happier with the color penetration when compared to shellac. 

==> Maple mantel dark

 

tough to get maple dark without muddying the surface.  gel stains and water-based dyes are probably the best route.  There are also some chemical processes that will also impart a dark tint, but they are not particularly safe... NGR dyes will also work, but you should only spray them -- actually, you should only really spray water-based dyes as well, but you can get away with hand-applied if the area  is small and you work quickly...  Remember, you can change the color with transtint, magic color, etc.  If you want darker, add some india ink.  You never have to be satisfied by what's in the can...

 

As Marc said, CN is probably best under a WB tint...  The thing with CN, you can do the 1/2 treatment (1 coat with overnight) or apply the full 2-coat.  I only use 2-coats for really blotchy surfaces or end-grain.  2-coats tends to inhibit tint absorption (as you would expect).  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.