Robert Black Posted February 16, 2013 Report Posted February 16, 2013 Hey all, I've read for three straight days comparing these two saws and still seem to be riding the fence. Seems to be pros and cons on both sides that balance out. I like the encapsalated dust collection on the 1023RL and the single poly-v belt drive, the over sized stop switch, and the standard shop fox fence. On the 0690, I like the location of the dust port better, the extra room to the left of the blade, and the lesson motor. **just a few examples** Does anyone have any insight to share? Has anyone used both and found something they really liked about one to the other? Thanks for your consideration. Robert Quote
tim0625 Posted February 16, 2013 Report Posted February 16, 2013 I have had the 1023RLWX for a year now and absolutely love it. Like you, I researched it a bunch and decided on the 1023 - 5 HP just because it was about the same price as the lower HP. DC is nothing to write home about. Every so often, I'll turn the DC on and take my air hose and blow things around from the top of the table saw. Where dust is collecting in the corners, it will get it all out. A while back, someone one here had a Grizzly saw and had taken their DC port apart and modified it. There's a 2" hose that runs from the DC port to beneath the blade. If I remember correctly, he removed the hose and it worked a lot better. Either way, I'm still satisfied. Quote
knotscott Posted February 16, 2013 Report Posted February 16, 2013 You're not alone....just about everyone who considers one of the entry level 3hp cabinet saws goes through this decision. From what I've witnessed on the web, there's no clear winner....both well regarded saws that represent excellent bang for the buck. Prices are within $100 (which actually buys a pretty decent blade). G0690: 30" stock rip capacity, Asian made Leeson made, traditional triple belt drive system, traditional swing arm arbor design, made in China G1023RL: 26"stock rip capacity, serpentine belt drive system, vertical elevation screw with dovetail ways, blade shroud, has the Shop Fox Classic fence, includes a $10.40 blade...err, I mean a 10" 40T blade, made in Taiwan. The G0690 is much more similar to the older G1023S model, that has been modified to accept a riving knife. The G1023RL is an updated design built from the ground up to incorporate a riving knife. I have not heard of pluses or minuses with either motor, or drive system, but the serpentine belt should be inherently smoother. The SF Classic fence has a slightly wider fence tube, and is more proven. Since both of these saws are left tilt, it's pretty easy to slide the fence farther to the right with no drilling to get 36" and 40" rip capacities if you prefer. You'll want a good blade or three for either of them...save the stock blade for junk cuts. Older G1023S: G0690: G1023RL: Quote
Robert Black Posted February 17, 2013 Author Report Posted February 17, 2013 Tim, thanks for the feedback based on your saw. I'll remember that. Knotscott, thanks for the info. It sounds like you favor the 1023 slightly. Am I right? Quote
knotscott Posted February 17, 2013 Report Posted February 17, 2013 .... Knotscott, thanks for the info. It sounds like you favor the 1023 slightly. Am I right? Exactly right....I favor the G1023RL slightly for the serpentine belt, dovetail ways, and the known entity of the SF Classic fence...I also like that it's made in Taiwan vs China. Both designs are well executed, so neither is a concern for me. Go with your gut. Quote
tim0625 Posted February 17, 2013 Report Posted February 17, 2013 I'll say this guys....I haven't used the 690 but the 1023's serpentine belt is really smooth. That and the price being about the same going to the 690 to the 5HP, 1023, I was won. I came from a Craftsman about 40 years old and it had to spool up and then at speed, nothing seemed balanced. Now, I hit the switch on the new saw and instant, smooth 9,000,000 rpm. I love it. Of course............coming from the saw that I did, I'm afraid many saws would have seemed a world better but i really think this one is. Quote
Eric. Posted February 17, 2013 Report Posted February 17, 2013 I'll throw in a vote for the 0690. I have a number of Grizzly tools, both Chinese and Taiwanese, and the 0690 is the one I'm most impressed with. Like butta. Love it. Quote
Robert Black Posted February 20, 2013 Author Report Posted February 20, 2013 Well, after much ado, I pulled the trigger last night on the 1023RLW, also ordered some new blades, cant wait to use it! Thanks all for the feedback. Quote
Mister Pants Posted February 20, 2013 Report Posted February 20, 2013 I own the 0691 (the 0690 with the 52" extension), I'm very happy with it, it runs smoothly, the fence is great and the riving knife is very easy to swap out. While it's made in China it still appears to be built to Grizzly's normally high standards (for their price). The only thing I can think of against it would be the packaging it came in was weak. I haven't used the 1023RL though so can't speak to it. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.