Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Shop revamp with tool additions

Featured Replies

My shop is roughly 3/4 of a 1 car garage, so space it tight. I recently added some new tools and now need to reorganize my layout for a efficient work flow. Here are some pictures of my shop in it's current state. The right side of the garage is where I am going to do most of woodworking. That's where I have a bench, bandsaw and wood rack. I am still on the fence on weather or not to keep the bench. I bought it from a guy of CL for $25. The top is crap and pretty much useless. I put a piece of foam insulation on it to calibrate my TS75 and guide rails. If I do keep it I may just throw a solid core door on for the top, add a vise and call it a day. The only problem is that it takes up precious space in my garage. I am in not in love with where my wood storage is currently located. I may move it to the other side of the garage over the lawn mower. 

 

The worktop that is sitting on the saw horses is actually two laminated Ikea butcher block tops. I use that for a make shift workbench when I was experimenting with hand tools. I am thinking about adding 1/2" piece of MDF and some hardboard and turning it into an assembly table. 

 

Tools started with:

Grizzly G0555 bandsaw

Delta lunchbox planer,

Dust right Vortex

Jack Plane

Dovetail saw

Hand saws

Chisels

Parallel Clamps

Shop Vac

Kreg Jig

 

Tools Added:

TS75 with 1900 Guide Rail

CT 26

ETS 150

OF 1400

CXS

1400 Guide Rail

1080 LR32 Guide Rail

Domino DF  500

Domino assortment Systainer

 

Tools on the way:

Grizzly G0713 table saw

MFT 1080 (maybe)

Whiteside 10 essential router bit set.

 

I have not used the domino yet, it's the one tool that I am not sure about. I know everyone loves it and I am sure that I will love it too. The only problem is that I think I should have gotten a jointer instead even if it's only a 6". 

 

I started with a pretty decent budget but it went quickly when I started buying the green stuff. This not a permanent shop, I will be moving in 3 years or less. I don't have 220 and I can't make loud noise after 10 PM. I work shift work, which means I work weekends, nights, graveyard and days. My woodworking will take place a lot at night after 10 pm. I have a very young baby at home as well so noise is a factor for her too. The Festools are surprisingly quick compared to table saw, jointer and planer which became a factor when choosing tools. 

 

Any suggestions are welcome. 

 

 

post-104-0-74444800-1361122773_thumb.jpg

post-104-0-74963500-1361122774_thumb.jpg

post-104-0-70588000-1361122775_thumb.jpg

post-104-0-72866900-1361122776_thumb.jpg

post-104-0-55825200-1361122777_thumb.jpg

post-104-0-26786500-1361122778_thumb.jpg

post-104-0-94791600-1361122778_thumb.jpg

post-104-0-63889400-1361122779_thumb.jpg

post-104-0-33057100-1361122780_thumb.jpg

First thing I'd do is move the golf clubs, bikes, and the rest of the miscellaneous non-shop clutter to the basement...if you have one.  Maybe hang the bikes on the ceiling instead...if you use them often.  Lawnmower goes in the backyard under a deck, awning or tarp...and that makes space for your new jointer.

 

Since you're moving, it doesn't make sense to pay for a shed, but when I first committed to getting a real shop together, that's the first thing I did...spent a month of Sundays building a nice, big shed in the backyard and filled it to the brim with all the crap a garage accumulates.  NOTHING but woodworking in my shop.  And I mean nothing.  Well, a stereo and a leaf blower I use to clean up.  That's it.  Everything else is tools, materials and work surfaces.  I even put a bunch of my "construction" tools in the shed.  If I don't need it in the shop on a semi-regular basis, it gets voted off the island.

  • Author

First thing I'd do is move the golf clubs, bikes, and the rest of the miscellaneous non-shop clutter to the basement...if you have one.  Maybe hang the bikes on the ceiling instead...if you use them often.  Lawnmower goes in the backyard under a deck, awning or tarp...and that makes space for your new jointer.

 

Since you're moving, it doesn't make sense to pay for a shed, but when I first committed to getting a real shop together, that's the first thing I did...spent a month of Sundays building a nice, big shed in the backyard and filled it to the brim with all the crap a garage accumulates.  NOTHING but woodworking in my shop.  And I mean nothing.  Well, a stereo and a leaf blower I use to clean up.  That's it.  Everything else is tools, materials and work surfaces.  I even put a bunch of my "construction" tools in the shed.  If I don't need it in the shop on a semi-regular basis, it gets voted off the island.

Yea I agree I do need to unclutter the  shop a bit. The bikes are staying, golf clubs are going in the house and I will see if I can put the lawn mower in the back yard.

When it comes time for me to buy a nice shop vacuum, I was looking into the CT26. Have you used it yet?

  • Author

Yes I have and actually had some dust collection issues. It was not as good as what I had expected but maybe I just need a little more time with it the tools before I can give a full review. 

Yes I have and actually had some dust collection issues. It was not as good as what I had expected but maybe I just need a little more time with it the tools before I can give a full review. 

Just keep in mind that they are really just a shop vac. They shine by keeping the dust and not expelling it back out the exhaust. You not going to see any of the Festool super powers in any of the tools. Each has it own benefit but in the end they are what they are.

Don

  • Author

Just keep in mind that they are really just a shop vac. They shine by keeping the dust and not expelling it back out the exhaust. You not going to see any of the Festool super powers in any of the tools. Each has it own benefit but in the end they are what they are.

Don

I think I set my expectations too high. I should not complain, dc is much better than any shop vac setup I have tried. Not to mention much quieter, which always me to stay in the shop well past midnight.

Did I see a kegerator in there too? If so just get rid of everything except the kegerator and the tools and you'll be good to go.

  • Author

Did I see a kegerator in there too? If so just get rid of everything except the kegerator and the tools and you'll be good to go.

Yes that is a Kegerator :D. I have started to move some stuff but really I can only move so much. My wife will not let me completely take over the garage and in a way I have to agree with her. After all she did just let me spend a few thousand dollars on tools. I have to know my limits and taking over the garage completely is where it's at.

  • Author

Finally got the table saw put together. It takes up more space than I thought it would. Now I just have to figure out where to put it.

post-104-0-63217300-1361739428_thumb.jpg

The tablesaw up, and running thats great I thought you had talked yourself out of that purchase you won't regret haveing it. James it's on wheels you can move it anywhere out of the way when not in use than right in the middle of the garage when you need to use it hot and, heavy.

  • Author

 

The tablesaw up, and running thats great I thought you had talked yourself out of that purchase you won't regret haveing it. James it's on wheels you can move it anywhere out of the way when not in use than right in the middle of the garage when you need to use it hot and, heavy.

 

I had talked myself out of it at one point but I knew I would regret not having one. There was a 10% coupon for Grizzly on one of the other forums, which was enough to push me over the edge. Hopefully everything is tuned up and setup properly. I don't have a dial indicator so I had to use my combo square for all the alignment checks. I can move it around fairly easily I just wanted to avoid having to move it a lot but may be my only option.

I think a combo square will get you plenty close, thats all I've ever used myself, and I've never had problems. I'll bet if you read the manual thats what they recomend. set your square to where it just barely scraps a tooth without deflecting the blade mark that tooth with a sharpie spin the blade to the other side if the square barely scraps your golden.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.