Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Spray Gun Question

Featured Replies

I have a old Devilbiss spray gun MBC 510 that I use for finishing but I accidentally broke my fluid tip. Now I'm looking for a replacement. How here's the problem. I found a replacement tip but it's 1.4mm while my needle is 1.8mm. I need to know if I'll have any problems finishing when I use this gun. Or should I buy the tip and then find a matching needle? I have a #30 aircap if that matters too. 

 

I mostly spray lacquer and I really don't need such a large tip set. 

Did the gun fall? Probably should replace the air cap and needle too. That is the business end of the gun. You want to maintain a quality spray pattern. A fluttering spray pattern usually can result due to an improper needle to nozzle fit. Sometimes you can get away with seating  the needle into the nozzle by chucking the back end of the needle into a in a drill motor and holding the nozzle in your hand and insert the needle end into the fluid nozzle and bump the trigger of the drill. 

 

If this were me... I would be on the phone with Devilbiss or your local auto body store who sell Devilbiss guns. They may tell you it's no problem? Or give it a try see if it works...it's on old gun anyway....maybe time to upgrade!!!!

 

-Ace-

  • Author

Did the gun fall? Probably should replace the air cap and needle too. That is the business end of the gun. You want to maintain a quality spray pattern. A fluttering spray pattern usually can result due to an improper needle to nozzle fit. Sometimes you can get away with seating  the needle into the nozzle by chucking the back end of the needle into a in a drill motor and holding the nozzle in your hand and insert the needle end into the fluid nozzle and bump the trigger of the drill. 

 

If this were me... I would be on the phone with Devilbiss or your local auto body store who sell Devilbiss guns. They may tell you it's no problem? Or give it a try see if it works...it's on old gun anyway....maybe time to upgrade!!!!

 

-Ace-

No it didn't fall. I was just cleaning the tip and then I noticed a piece broke off. :(

And I just found out its a conventional gun and not HVLP. :(

Conventional guns are fine we use them all the time for spraying stain and primer/surfacer on projects.  I also have an old one that sprays contact cement great.  I agree with ACE get on the phone with Devilbiss and see what you need.  You can get that gun working then pick up a good HVLP for spraying your clear finishes. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.