duckkisser Posted February 27, 2013 Report Posted February 27, 2013 i have some 8" razor sharp wheels that i want to put on a 6" grinder is that possible? keep in mind the wheels are paper so they weigh very little and im just using it for sharpening not for heavy grinding. can the machine keep up or will the motor get damaged? can i expect the berings to get broken from a wider wheel? http://www.grizzly.com/products/8-Razor-Sharp-System/G5937 here is the wheels Quote
BigE Posted February 27, 2013 Report Posted February 27, 2013 What HP is the grinder motor? Anything less than 1/2 hp might have trouble. You may get away with 1/3 hp. Wheel clearance would probably be your biggest issue, literally. Quote
duckkisser Posted February 27, 2013 Author Report Posted February 27, 2013 na just remove or cut the shields off . im looking at a cheap 26 doller bench grinder http://www.menards.com/main/flyer.html?&store_code=3093&flyer=flyer&getGoogleKey=true its the march savings ad on page 23. here is the grinder im looking at says 2.1 amp and 3500 rpm dont know any more then that. i checked out that company and a representative told me that the wheels can be spun on 6" grinder and long as it turns 3000 rpms Quote
BigE Posted February 28, 2013 Report Posted February 28, 2013 Sounds like it is only 1/6th of a HP. Might work, but you won't be happy with it. Just go and get a cheap harbor freight 8" grinder if you want cheap. http://www.harborfreight.com/8-inch-bench-grinder-with-gooseneck-lamp-37823.html Quote
duckkisser Posted February 28, 2013 Author Report Posted February 28, 2013 i dont want something that is going to heat the metal this is strictly a sharpening and honing machine. not useing it for grinding or shaping. Quote
TRBaker Posted March 1, 2013 Report Posted March 1, 2013 Duck, I don't see a problem with it. If it's underpowered, you'll know it right off the bat. You can always put your grinding wheels back on. Quote
duckkisser Posted March 1, 2013 Author Report Posted March 1, 2013 no problems so far i just touched up all my carving knives only cut myself once and that was puting it away. Quote
tim0625 Posted March 3, 2013 Report Posted March 3, 2013 I've done it....8 on a 6....6 on a 4 1/2....just go slow and keep feeling the....uh.....whatchacallit.....the hog head....the....rear end housing....keep a watch on the heat build up. Too hot and it pushes the grease out. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.