wjffineww Posted March 6, 2013 Report Posted March 6, 2013 I just picked up 2 mortising jigs, used and fairly cheap so I figured I couldn't go wrong. I got the Mortise Pal, and the Jessem Zip Slot Mill. Any body use these? Thoughts, tips,tricks, best uses on either? Are they worth using or just stick to the hollow chisel mortiser? Thanks in advance Quote
Nick2cd Posted March 6, 2013 Report Posted March 6, 2013 A while back I almost pulled the trigger on the mortise pal. Seems like a fantastic little jig. I constantly came across good reviews on it. Only reason I held off was cuz my wife surprised me with a domino Quote
Beechwood Chip Posted March 6, 2013 Report Posted March 6, 2013 Not that I have personal experience, but I'd use the hollow chisel mortiser for anything small enough to bring to the tool. I'd use a jig for things where I want to bring the tool to the piece. Quote
Barron Posted March 6, 2013 Report Posted March 6, 2013 I've had a mortise pal for a while now and it works great. Just make sure the plunge retracted all the way before you lift the router off the wood. If not, you will be replacing the plastic template. The newer models look like they are a little easier to set up, but short of a Domino or hollow chisel it's hard to beat. Quote
wjffineww Posted March 7, 2013 Author Report Posted March 7, 2013 Thanks for the responses, ideally I want a Domino, but budget just doesn't allow it. I haven't used either jig yet, and I like the looks of the Mortice Pal a lot.In regards to the Jess Em, It just seems like you can't drill a very deep mortice, maybe 1 1/2'' max on one piece. Maybe that's enough for most applications? Quote
wjffineww Posted March 13, 2013 Author Report Posted March 13, 2013 Quick update, I finally got to try out both jigs, and the Mortise Pal wins by a landslide. It's easy to set up and use, seems to be very accurate, no complaints with it at all. The Jess Em on the other hand is basically the total opposite. Pain to set up, didn't seem too accurate, the drill just doesn't cut it(literally) I can't say one good thing about it really, which is a disappointment because I really like Jess Em products, I have a router lift, and plan to get a router table top and fence from them. Two thumbs up on Mortice pal Two thumbs way down on Jess Em unfortunately Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.