duckkisser Posted March 7, 2013 Report Posted March 7, 2013 i own this tool rest which by the way is very addaptable but the problem is i have two bench grinders and one tool rest. i want to make it so that this tool rest can move between wheels quickly and easily. mostly because i dont want to fork out 60 dollers for each one so it would be another 120 dollers. http://www.woodcraft.com/product/2083668/35809/veritas-grinder-tool-rest.aspx so i was thinking of mounting this tool rest to a piece of wood that i can move to each wheel. we will call this the grinder rod. the rod needs to be mounted under the wheels to my table top so what i had thought to do was to build a box around the space where the grinder rod would go then i just slide it into the box and use a knob to hold the rod in place. then i can unscrew it and move the rod to another similar box on a different wheel. the reason im doing this is i have a regular grinding wheel, a white wheel, and a honeing wheel. if that makes any kind of sence then perhaps you guys might have an idea of what i can do to make this work easer or any problems i might face Quote
Vic Posted March 7, 2013 Report Posted March 7, 2013 Just the different wear speed on the two wheels will change the angle, so you'll need to adjust more often. Quote
duckkisser Posted March 7, 2013 Author Report Posted March 7, 2013 i have a angle finder that came with the tool rest that has 20-25-30-35 degree angles so its not hard to find it each time. for the most part i wont be moving it often for carving tools because for the honing wheel i dont need a rest except when im working on my chisles. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.