Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

What do to with my SawStop PCS while waiting for the mobile base.

Featured Replies

I recently purchased the 1.75HP SawStop PCS and have taken advantage of the promotion that offers a free mobile base or DC arm. I picked the base because the arm requires and extra $130 for the blade guard. I've registered for the free mobile base but it takes 4-6 weeks to deliver and I don't want to assemble the saw before I receive the base.

Any ideas on how to position the saw so that I can assemble and use it now but still install the base when it arrives without a hurculean lifting effort? Maybe put it on blocks now and lower it on the base later? Or buy a base now install it, and then return the one from SawStop in its place when it arrives?

i would be afraid of buying a base and trying to return the unit sawstop sends you.  they may package their promotional stuff differently and the dealer may tell you tough cookies.  if you are going to go this route, i'd clear it with your dealer and with sawstop first.  im not familiar with how the mobile base integrates with the cabinet saws, but maybe you could read through the assembly manual and predict if it will be possible to retrofit the mobile base.  i imagine this has to be possible without having to take it all back apart as im sure customers purchase the base after they have owned the saw for a while.  

I went ahead and assembled my cabinet saw.  After I built the mobile base, I just got a couple guys to help lift the saw, rolled the base under and let it down.  It's not all that heavy.

I know I'm probably too late, but the mobile base doesn't just roll under the saw.  The mechanism bolts into the bottom of the cabinet.  If you assemble the saw first, you'll probably have to turn the saw on it's side or lift it up and work on it from beneath - like working on a creeper under a car.

I know I'm probably too late, but the mobile base doesn't just roll under the saw. The mechanism bolts into the bottom of the cabinet. If you assemble the saw first, you'll probably have to turn the saw on it's side or lift it up and work on it from beneath - like working on a creeper under a car.

What would be the harm of not bolting it to the base?

I know I'm probably too late, but the mobile base doesn't just roll under the saw.  The mechanism bolts into the bottom of the cabinet.  If you assemble the saw first, you'll probably have to turn the saw on it's side or lift it up and work on it from beneath - like working on a creeper under a car.

Mine was a left side and a right side parts and that is basically what I  did except only tilted it enough to get hands, parts and tools underneath. One side then the other. Was not very hard. 

When I got mine through the rebate it was only about a week before the mobile base arrived via UPS.  Adding the mobile base after the saw was assembled was really no problem.  Just undo two bolts from the two legs at the end of the extension table and fold them up.  Tilt the motor over to the 45 degree position and the saw will be really easy to tip up to the side and balance it on the end of the rails.  This provides plenty of access to install the casters and lifter mechanism.

On my 3hp PCS, the mobile base is part of the base itself. It really works well. I would recommend patience and wait for the ss parts to arrive.

  • Author

Weld? Definitely not.

 

Thanks everyone for your input. Turns out the mobile base arrived from SawStop about a week after I applied for it, as opposed to the 4-6 weeks they advertised (under promise, over deliver I suppose). Luckily, I haven't gotten that far in the assembly process so I can still tip the saw on its side in order to install the base without too much fuss.

 

I also went to the SawStop website and looked at the mobile base assembly instructions. They claim you can tip a fully assembled saw onto it's rails (they say it will stay in place) and access the underside of the cabinet. Just a tip for anyone else who runs into this problem in the future.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.