Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Spray guns

Featured Replies

I want to get a inexpensive spray gun. Does Home Depot have any gravity feed guns that are decent but will not break the bank. I have a air compressor that I am going to hook it up too. 

Check out this one:

http://www.woodcraft.com/product/2021128/25126/woodriver-pro-hvlp-spray-gun-with-600cc-plastic-cup.aspx

 

I bought it a couple years ago for spraying shellac.  It works well. I have pulled of using it on my small pancake compressor, for smaller projects.

 

I was recently pointed out this one as well:

http://www.harborfreight.com/20-oz-8-cfm-gravity-feed-spray-gun-67181.html

 

The only difference I can tell is the harbor freight one is purple.

Hey James, not too familiar with the guns from HD, but I wanted to mention one thing to consider when looking around.  That would be the amount of air (CFM) that the gun will require to work properly.  I don't know what you have in reference for a compressor, but if it's a pancake style then I think the biggest gun you'll be able to run would be a small touch-up / detail gun (something around 2-3cfm requirement).  If I remember correctly pancake compressors have an output of around 2cfm. 

 

The larger style guns will need something more like 8-10 cfm (minimum) which puts you in the 220v category compressor. 

 

CFM can be cheated a bit by taking short breaks to let the compressor catch up (30 seconds at a time or so). 

 

I just wanted to bring this up as a high end gun will spray like crap if it's under-powered with air.  An OK gun will typically give decent results if the required air flow is there..

What's your cost limit, what are you spraying and how large is your compressor? 

  • Author

Thanks for all the replies. I think Don is right and LVLP would work better because I have a smaller compressor. Maybe I will just hold out for a Earlex.

Thanks for all the replies. I think Don is right and LVLP would work better because I have a smaller compressor. Maybe I will just hold out for a Earlex.

The only reason to go turbine over compressed is portability or lack of compressor. If you already have a small but oil lubricated quality compressor your almost always going to be better off ging with a quality LVLP gun. Systems like the Earlex are fine but they are what they are which is just a inexpensive system with a poor bleeder gun. Your buying an entire system for $300, the gun quality is sacraficed with these systems. Yes everyone will say they spray fine but they dont spray even close to the same as a good quality gun. Those of us that buy high quality guns dont buy them just because we like spending money. No turbine system comes with a great gun. Even the expensive apollo's and fuji's come with just an average gun. You can get a lower end asturo LVLP for about $300 that will perform better than most any turbine in the $1000 price range. For a home shop that is really about all that is needed. The turbine will give you a longer duty cycle but that is not really a worry for a home shop even if your spraying a kitchens full of cabinets.

I can spray all day long with this gun.

http://www.spraygunworld.com/products/Asturo/WB%20Kit/IndexWBII%20PPS.html

With this compressor

http://www.lowes.com/pd_346458-70-E810-4V_0__?zipCode=98498&masthead=true&firstReferURL=http%3A%2F%2Fwww.lowes.com%2Fpd_346458-70-E810-4V_0__%3FproductId%3D3400030&catalogId=10051&catalogId=10051&productId=3400030&findStoreErrorURL=StoreLocatorDisplayView&selectedLocalStoreBeanArray=%5Bcom.lowes.commerce.storelocator.beans.LocatorStoreBean%4030583058%2C+com.lowes.commerce.storelocator.beans.LocatorStoreBean%4032903290%2C+com.lowes.commerce.storelocator.beans.LocatorStoreBean%4034c834c8%2C+com.lowes.commerce.storelocator.beans.LocatorStoreBean%4037003700%2C+com.lowes.commerce.storelocator.beans.LocatorStoreBean%4039383938%5D&Ntt=&langId=-1&langId=-1&URL=TopCategoriesDisplayView&mastheadURL=TopCategoriesDisplayView&storeId=10151&storeId=10151

With better performance than my turbine and I dont have to listen to the screaming turbine.

http://www.hvlp.com/turbine_detail.php?id=8

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.